Maintenance; Changing The Engine Oil - Clarke Power FG2000 Operation & Maintenance Instructions Manual

Table of Contents

Advertisement

MAINTENANCE

CHANGING THE ENGINE OIL

CAUTION: PROLONGED EXPOSURE TO USED ENGINE OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS THOROUGHLY AFTER HANDLING USED
ENGINE OIL.
1. Unscrew and remove the oil filler
cap/dipstick.
2. Place a oil collection tray under
the drain plug.
3. Unscrew the drain plug, and allow
the used engine oil to drain from
the crankcase into the oil
collection tray.
NOTE: Drain the engine oil when the
engine is warm, this will
ensure the oil flows out
quicker.
4. Replace the drain plug and its ring
seal.
5. Fill the crankcase with engine oil to the 'H' mark on the dipstick. See
page 11.
6. Replace the oil filler cap/dipstick.
ENVIRONMENTAL PROTECTION
One of the most damaging sources of pollution is oil, Do not throw away used
engine oil in with your domestic trash or down drains and sinks. Place it in a
leak proof container and take it to your local waste disposal site.
18

Advertisement

Table of Contents
loading

Table of Contents