Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
The generator fails
to start
The generator fails
to generate
electricity
The generator is
difficult to start
If this does not solve your problem, please contact the Clarke service
department. See page 25
CAUSE
Ignition switch is off
Not enough oil in the
generator
No fuel
Spark plugs not working
correctly
The device you are trying to
power is faulty
The AC breaker has activated Press the AC overload reset button
The air filter is dirty
The fuel filter is dirty
SOLUTION
Set the ignition switch to 'on'
Add more oil, See page 11
Add more fuel, See page 12
Change the spark plugs, See
page 19
Make sure the device you want to
power is working properly
Clean the air filter, See page 20
Clean the fuel filter, See page 21
22
Advertisement
Table of Contents
