Tail/Stop Lights And Rear Turn Signal Lights; Backup Lights - Chrysler PT Cruiser Owner's Manual

348 MAINTAINING YOUR VEHICLE

Tail/Stop Lights and Rear Turn Signal Lights

1. Remove the screw attaching the tail light housing and
remove the housing from the vehicle.
2. Twist the bulb socket one—quarter turn to remove it
from the housing.
3. Pull the bulb out of the socket and replace.

Backup Lights

1. To remove the backup lamp, you must take a fiber
stick and slide it along the inboard side of the lamp and
compress a spring clip to allow it to partially pop out to
the secondary catch.