Four-Speed Automatic Transaxle - Chrysler PT Cruiser Owner's Manual

228 STARTING AND OPERATING
CAUTION!
Damage to the transaxle may occur if the following
precautions are not observed:
Shift into PARK only after the vehicle has come to
a complete stop.
Shift into or out of REVERSE only after the
vehicle has come to a complete stop and the engine
is at idle speed.
Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
idle speed.
Before shifting into any gear, make sure your foot
is firmly on the brake pedal.
NOTE: You must step on the brake pedal and depress
the shift lever knob button before you will be able to
move the shift lever out of PARK.

Four-Speed Automatic Transaxle

NOTE: Under extreme cold temperatures (-6°F (-21°C)
and when in DRIVE, transmission operation may be
briefly limited to only 2nd gear operation. Normal op-
eration will resume once the transmission temperature
has risen to a suitable level.
The electronically-controlled transaxle provides a precise
shift schedule. The transaxle electronics are self-
calibrating; therefore, the first few shifts on a new vehicle
may be somewhat abrupt. This is a normal condition, and
precision shifts will develop within a few shift cycles.
RESET Mode
The transaxle is monitored electronically for abnormal
conditions. If a condition is detected that could cause
damage, the transaxle shifts automatically into 2nd gear.
The transaxle remains in 2nd gear despite the forward
gear selected. PARK, REVERSE, and NEUTRAL will