Tail/Stop, And Rear Turn Signal Lights; Back Up Light Bulb; Center High Mounted Stop Light - Chrysler 2006 PT Cruiser Convertible Owner's Manual

410 MAINTAINING YOUR VEHICLE

Tail/Stop, and Rear Turn Signal Lights

1. Remove the screw attaching the tail light housing and
remove the housing from the vehicle.
2. Twist the bulb socket 1/4 turn to remove it from the
housing.
3. Pull the bulb out of the socket and replace.

Back Up Light Bulb

1. To remove the back up lamp housing from the rear
fascia, carefully pry out on the outboard side of the
housing.
2. Remove the socket from the housing.
3. Pull the bulb out of the socket and replace.

Center High Mounted Stop Light

1. Open the liftgate and remove the liftgate CHMSL
cover.
2. Remove CHMSL lens from the housing by unlatching
the two side latches.
3. Pull the bulb out of the socket and replace.