Chrysler PT Cruiser Owner's Manual page 301

CAUTION!
Do not attempt to raise the vehicle by jacking on the
cross-member below the radiator, on the front sus-
pension cross-member, or on the rear axle assembly.
2. There are two jacking locations on each side of the
body, one at the front of the vehicle and one in the rear on
the trailing arm bracket under the triangular cut out
symbol. Turn the jack screw to the right until the jack
head is properly engaged with the lift area closest to the
wheel to be changed.
WHAT TO DO IN EMERGENCIES 299
Jacking Locations
1 — Front Jacking Location
2 — Rear Jacking Location
Do not raise the vehicle until you are sure the jack is
securely engaged.
6