Odometer Display; Trip Odometer (Odo) - Chrysler PT Cruiser Owner's Manual

2. Press and hold (approximately 10 seconds) the
Compass/Temperature RESET button until the current
variance zone number is displayed.
3. Release the RESET button, then press and hold again
(approximately 10 seconds), until the direction is dis-
played with the CAL indicator on continuously in the
display.
4. To complete the compass calibration, drive the vehicle
in one or more complete 360 degree circles, under 5 mph
(8 km/h) in an area free from power lines and large
metallic objects, until the CAL indicator turns off. The
compass will now function normally.

Odometer Display

When the appropriate conditions exist, the following
odometer messages will display:
CRUISE . . . . . . . . . . . . . . . . . . . . . . Cruise Activated
UNDERSTANDING YOUR INSTRUMENT PANEL 175
gASCAP . . . . . . . . . . . . . . . . . . . . . . . Fuel Cap Fault
noFUSE . . . . . . . . . . . . . . . . . . . . . . . . . . Fuse Fault
These messages can be manually turned off by pressing
the right reset button (on the instrument cluster).

Trip Odometer (ODO)

This display shows the distance traveled since the last
reset. Press and release the right button (on the instru-
ment cluster) to switch from odometer, to trip A or trip B.
Press and hold the right button while the odometer/trip
odometer is displayed, to reset.
Trip A
Shows the total distance traveled for trip A since the last
reset.
Trip B
Shows the total distance traveled for trip B since the last
reset.
4