How To Finish Unpacking - Electrolux COMPETENCE 3210 BU Operating And Installation Instructions

INSTALLATION INSTRUCTIONS
Check that the mounting brackets are level.
They can be adjusted if necessary by using the
extra holes at the ends of the brackets. Once the
brackets are level, drill a pilot hole through the
central hole in the bracket and fit the remaining
screw.

HOW TO FINISH UNPACKING

Place appliance next to the space in which it will
be installed. See Fig 8.
Remove the appliance packing except for bottom
tray which should be left in position until the
appliance is ready to be fitted into its cabinet.
Ensure the owner is given these operating
instructions.
NOTE: It is imperative that the appliance is left in
the base to protect both the appliance and the
floor.
Important: Switch off at mains, miniature
circuit breaker and, if appropriate, remove
fuse before commencing any electrical
work.
NOTES
Fig. 8
39