Verification Steps - Avaya Multi-Tech FaxFinder Application Notes

8. Verification Steps

The following steps may be used to verify the configuration:

From Avaya Aura
command to verify that the signaling groups are in-service.

From Communication Manager SAT, use the status trunk-group command to verify that
the trunk groups are in-service.

Verify that fax calls can be placed to/from Multi-Tech FaxFinder® IP Fax Server servers at
each site.

From Communication Manager SAT, use the list trace tac command to verify that fax calls
are routed to the expected trunks.

From Avaya Aura
Session Manager and the FaxFinder server is in service.

From the FaxFinder web interface, navigate to Status & Logs > Fax Status to see the
current status of each port and any inbound or outbound fax activity currently in progress:
Additional System Status information such as the status of connectivity to Session Manager and
network shares can be found on the Status & Logs > System Status page:
Additional status screens showing mail queues and logs, inbound and outbound fax logs etc are
also available (not pictured) from the Status and Logs web pages.
RAB; Reviewed:
SPOC 7/12/2011
®
Communication Manager SAT, use the status signaling-group
®
System Manager, confirm that the Entity Link between Avaya Aura
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
®
32 of 34
FaxFinder_SM61