Table of Contents
Advertisement
o You should insert a clip (A) into the holes which are located in
each corner of the hob.
o Place the fixing brackets (B) over each hole and clip, and then
place a screw (C) through the hole and fixing bracket (B).
Tighten the screws a little way, so that they stay in place.
IMPORTANT: Do not tighten the screws fully.
o Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
(A)
Clip
(B)
Fixing bracket
(C)
Screw
o On the underneath of the hob,
locate the fixing brackets (B) and
turn them so that they locate on
the underneath of the worktop
and the hob.
o Fully tighten the screws (C) to
secure the hob into position.
24
Advertisement
Table of Contents
