Download Print this page

Baumatic BWTE42 User Manual page 6

Electronic wine cooler

Advertisement

Using your Baumatic wine cooler
Upper Compartment: The temperature setting can be adjusted between
10 C - 18 C (50 F - 64.4 F) ;
Lower Compartment: The temperature setting can be adjusted between
3 C - 10 C (37.4 F - 50 F).
The temperature of the bottles may fluctuate, depending on whether they
are located in the upper/middle or lower section.
3. To view the set temperature at anytime, press the corresponding
or
button, the set temperature will temporarily flash in the LCD
display for 5 seconds.
Flashing LCD = Set Temperature
Steady LCD = Cabinet Temperature
4. This unit has the option to display the temperature in either Celsius or
Fahrenheit. To change this setting, press the button marked C/F.
5. You can turn the interior lights on or off by pressing the button with a light
bulb on it. The interior lights are LED lights and low energy bulbs
(only 0.25W for each one) and low heat. However they should not be left on for long
periods of time, only whilst you are looking inside of the wine cooler.
6. Your wine cooler is designed with an Auto-Cycle defrost system. During
the Off-Cycle the refrigerated surface of the wine cooler (interior rear wall)
will defrost automatically. The defrost water is channelled into a drain pan
which is located at the back of the wine cooler on the top of the compressor,
from where it will evaporate.
Shelves
The shelving is chromed, so they can accommodate different sized bottles, they
can be moved up or down by sliding them out of their grooves. The original shelf
positions are designed to accommodate the maximum number of bottles.
Wine Rack
There is an additional wine rack at bottom section of the unit where you
can store up to 6 wine bottles. This rack is removable for cleaning purposes.
9
Using your Baumatic wine cooler
NOTE:
When you use the wine cooler for the first time or restart the wine cooler
after it has been turned off for a long time. There could be a few degrees
variance between the temperature that you have selected and the temperature
that the LCD shows that the inside of the cabinet is running at. This is normal
and the wine cooler will take a few hours to get down to temperature. Once
this happens, operation will return back to normal.
There is also a 2 to 3 C variance between the upper and lower shelves of
each wine compartment. Therefore, if you have set the wine cellar for red wine
only and the temperature reads 16 C and you want to place a mixture of white
and red wines in the appliance, you should place the white wine bottles on the
lower shelves and the red wine bottles on the upper shelves.
10

Advertisement

loading