Advertisement
Using your Baumatic wine cooler
YOUR WINE COOLER:
1
2
8
9
3
1. Operation and Display Panel
2. Cabinet
3. Levelling Leg
4. Wine Rack
5. Glass Door
6. Chrome Shelves
7. Interior Lamp
8. Electrical Control Assembly (at the back)
9. Temperature Sensor
7
6
5
4
5
Before using your Baumatic wine cooler
Important Safety Instructions
Read all instructions before attempting to use the appliance.
A child could become trapped and suffocate inside of an old and disgarded
wine cooler. Always make sure that the door is disabled and the appliance is
disposed of in a responsible manner.
Before you dispose of your old wine cooler, please do the following:
T ake off the door and leave the shelves in place, so that children cannot
climb inside easily.
Never allow children to operate, play with, or crawl inside of the appliance.
Never clean any part of the appliance with flammable fluids. The fumes can
create a fire hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids
in the vicinity of the wine cooler or any other domestic appliance. The fumes
can cause a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
Remove the exterior and interior packaging, including the protective foam on
the door panels.
Before connecting the appliance to your mains power supply, you should let it
stand upright for approximately 8 hours. This will reduce the possibility
of the refrigerant not settling properly, if it has been disturbed whilst being
handled during the transportation process.
Clean the interior surface with lukewarm water using a new soft cloth.
Installation of Your Wine Cooler
Place your appliance on a floor that is strong enough to support the
appliance when it is fully loaded. To level your appliance, adjust the
legs at the front of the appliance.
Allow a space of 5 inches between the back and sides of the appliance, this
will allow proper air circulation and helps to keep the compressor cool.
Locate the appliance away from direct sunlight and sources of heat
(E.g. stoves, heaters, radiators, etc.). Direct sunlight may affect the acrylic
coating and heat sources may increase electrical consumption.
Ambient temperatures below the climate classification stated on the rating plate
plate may also cause the appliance not to perform properly.
6
Advertisement
