3Com Router 5232 - 3Com 3C13701 Installation Manual

3Com Router 5232

Appearance
Panel LEDs
SDRAM (synchronous dynamic random-access memory): As the primary memory, stores
data for communication with CPU during system operation.
Flash memory: As the primary file storage media, stores application programs, anomaly
information, configuration file.
Boot ROM: Stores Bootstrap program.
Figure 3 Front view of 3Com Router 5232
1) POWER
3) AUX
5) SLOT1~3 (READY/ACTIVE)
Figure 4 Rear view of 3Com Router 5232
1) Power switch
3) Grounding screw
5) Fixed WAN interface (WAN0)
7) MIM SLOT2
10 LEDs are provided on the 3Com Router 5232. Their meaning is explained in the
following table:
Table 4 LEDs of 3Com Router 5232
LED Indication
POWER System power LED: OFF means power is off, ON means power is on.
SYSTEM Hardware status LED: Blinking means the system runs normally. ON/OFF means
the system is abnormal.
READY Module status LED: ON means the module in corresponding slot runs normally.
OFF means the module runs abnormally or no module is installed.
2) SYSTEM
4) CON
6) LAN (READY/ACTIVE)
2) Power socket
4) Fixed LAN interface (LAN0)
6) MIM SLOT1
8) MIM SLOT3
3Com Router 5232 13