4
Installation Process
I
NSTALLATION OF THE
Figure 7 3Com 5000 Router installation process
Start
Install the Router to
the specified location
Connect PGND
Connect power cord
Connect the Router to
Console terminal
Check
Power on
No
Normal?
Yes
Power off and disconnect
the power cord
Install MIM
Connect Router to Ethernet
Connect Router to WAN
Connect Router to voice
device
Check
Connect power
cord/power on
End
CAUTION:
You must follow this procedure to install the router. Otherwise, failed installation or
■
device damage may result.
Turn off the power switch and disconnect the power cord before installing interface
■
cards and interface modules.
Before installing the router, make sure that you have read Chapter 3 "Installation
■
Preparation" of this manual carefully and verify that the requirements listed have
been satisfied.
R
Troubleshooting
Power off
OUTER