Table of Contents
Advertisement
30579 Rev. 3.74 March 2007
Windows® XP Professional Installation
BIOS Configuration
Note: These instructions apply only to the ASUS M2N32-SLI Deluxe and L1N64-SLI WS
motherboards. Refer to the BIOS configuration utility help for additional
information about configuration menus and key combinations used to change
BIOS settings.
1. Power up the computer.
2. Press Delete to enter the BIOS configuration utility.
3. Select the Exit menu.
a. Select Load setup defaults.
b. Press OK.
c. Press ESC to return to the Main menu.
4. Select the Main menu.
a. Set Date and Time.
i. Select the IDE Configuration menu.
ii. Enable OnChip RAID1 Function.
iii. Enable SATA 1 through SATA 6.
b. Press ESC to return to the Main menu.
5. Select the Advanced menu.
a. Select the JumperFree Configuration menu.
i. Set AI Overclocking to Manual.
ii. Press ESC to return to the Advanced menu.
b. Select the CPU Configuration menu.
i. Disable Secure Virtual Machine.
ii. Press ESC to return to the Advanced menu.
c. Select the Chipset menu.
i. Select the Memory Controller menu.
ii. Set Memclock Mode to Manual.
iii. Set Memclock Value to 800 MHz.
iv. Set CAS Latency (CL) to 4.0.
v. Set TRCD to 4 CLK.
vi. Set TRP to 4 CLK.
vii. Set TRAS to 12 CLK.
viii. Set Node Interleaving to Auto.
ix. Press ESC to return to the Chipset menu.
Benchmarking System Configuration
AMD Processor Performance Evaluation Guide
27
Advertisement
Table of Contents
