Chapter 2 Hardware And Software Installation; Installation Overview; Installing The Graphics Card - AMD Radeon HD 7990 User Manual

This chapter details how to install your graphics card in your system as well as where
to download associated software and drivers.

2.1 Installation Overview

Once you have determined that your system meets the minimum requirements,
perform the following tasks to install your new graphics card. Detailed installation
instructions are provided in the following sections.
1.
2.
3.
4.
5.
6.
7.

2.2 Installing the Graphics Card

1. Turn off the computer, monitor(s), and other peripheral devices.
2. Unplug the computer's power cord, and then disconnect all cables from the back
3. Remove the cover to the computer's case.
© 2013 Advanced Micro Devices, Inc.
Hardware and Software Installation
If you are replacing an existing graphics card, uninstall the old graphics driver
and software.
Note: If you are using a motherboard containing an on-board graphics solution
and do not intend to use it as part of a multiple monitor configuration, disable
it.
Turn off and disconnect your computer system.
If needed, remove any old graphics card(s).
Install the new graphic card.
Reassemble and connect your computer system and display(s).
Start the computer system and install the new AMD Catalyst™ drivers and
configuration software.
Restart the computer system.
of the computer.
Caution:
Wait approximately 20 seconds after unplugging the power cord before
disconnecting a peripheral cable or removing a component from the
motherboard to avoid possible damage to the motherboard.
Note: If necessary, consult the computer manual for help in removing the
cover.
Chapter 2
AMD Radeon™ HD 7990 Graphics