Konica Minolta bizhub 20P Quick Manual page 26

Other Information
International ENERGY STAR
Statement
The purpose of the International ENERGY STAR
Program is to promote the development and
popularization of energy-efficient office equipment.
As an ENERGY STAR
BUSINESS TECHNOLOGIES, INC. has determined
that this product meets the ENERGY STAR
guidelines for energy efficiency.
Laser Safety
This equipment is certified as a Class 1 laser product
as defined in IEC 60825-1+A2: 2001 specifications
under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and
Safety Act of 1968. This means that the equipment
does not produce hazardous laser radiation.
Since radiation emitted inside the equipment is
completely confined within protective housings and
external covers, the laser beam cannot escape from
the machine during any phase of user operation.
FDA Regulations
U.S. Food and Drug Administration (FDA) has
implemented regulations for laser products
manufactured on and after August 2, 1976.
Compliance is mandatory for products marketed in
the United States. One of the following labels on the
back of the machine indicates compliance with the
FDA regulations and must be attached to laser
products marketed in the United States.
COMPLIES WITH 21CER 1040.10 AND 1040.11
EXCEPT FOR DEVIATIONS PURSUANT TO LASER
NOTICE NO.50, DATED JUNE 24, 2007.
26
®
Compliance
®
Partner, KONICA MINOLTA
®
IEC60825-1:2007 Specification
This machine is a Class 1 laser product as defined in
IEC60825-1:2007 specifications. The label shown
®
below is attached in countries where required.
This machine has a Class 3B Laser Diode which
emits invisible laser radiation in the Laser Unit. The
Laser Unit should not be opened under any
circumstances.
WARNING
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous invisible radiation exposure.
Internal laser radiation
Maximum radiation power:
Wave length:
Laser class:
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
PRODUCTO LASER DE CLASE 1
5 mW
770 - 810 nm
Class 3B