For Network Users; Bradmin Light Utility; Install The Bradmin Light Configuration Utility - Konica Minolta bizhub 20P Quick Manual

For Network Users

BRAdmin Light utility (For Windows
The BRAdmin Light is a utility for initial setup of KONICA MINOLTA network connected devices. It can also search
for KONICA MINOLTA products in a TCP/IP environment, view the status and configure basic network settings,
such as IP Address.
Note
• If you require more advanced printer management, use the PageScope Net Care Device Manager utility
that is available as a download from http://www.pagescope.com/.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
Install the BRAdmin Light
configuration utility
Note
The default password for the print server is
'access'. You can use BRAdmin Light to change
this password.
a
Click Network Utilities on the menu screen.
b
Click BRAdmin Light and follow the on-screen
instructions.
Note
For Windows Vista
Account Control screen appears, click Allow
(Yes).
20
® ®
/Windows 7, when the User
®
users)
Set your IP Address, Subnet Mask
and Gateway using BRAdmin Light
Note
If you have a DHCP/BOOTP/RARP server in your
network, you don't have to do the following
operation. Because the print server will
automatically obtain its IP Address.
a
Start BRAdmin Light. It will search for new
devices automatically.
b
Double-click the unconfigured device.
c
Choose STATIC for the Boot Method. Enter
the IP Address, Subnet Mask and Gateway,
and then click OK.
d
The address information will be saved to the
printer.