Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
WARNINGS:
·
This appliance must be installed by a
qualified electrician/competent person.
Safety may be impaired if installation is
not carried out in accordance with these
instructions.
·
This appliance must be earthed.
·
Do not remove the screws from the
earth tab extending from the oven
mains terminal block (Fig. 1).
·
Before connecting the appliance make
sure that the voltage of your electricity
supply is the same as that indicated on
the rating plate. This is situated on the
lower front frame of the appliance and
can be seen upon opening the door.
Alternatively the rating plate may also
be found on the back or top of some
models (where applicable).
·
Do not alter the electrical circuitry of
this appliance.
CHOICE OF ELECTRICAL CONNECTION
·
The appliance should be operated using at least
2
6mm
twin core and earth PVC insulated
multicore cable. Please choose from the most
appropriate after reading the descriptions:
·
By connecting the appliance to a cooker point
having a double pole isolating switch providing at
least 3mm contact separation in all poles and
protected with a fuse or miniature circuit breaker
at your mains fuse box.
·
If you wish to connect an oven and a hob to a
cooker point you can, by connecting the oven
and hob separately to the cooker point. Oven
and hob units should be separately connected to
a cooker point. See Fig. 2.
Fig. 1
Fig. 2
31
Advertisement
Table of Contents
