Table of Contents
Advertisement
BAUMATIC BDW2W / BDW2SS
e) THEN, CONNECT THE DRAIN HOSE
BELOW):
The curved end of the drainage hose should be hooked into the drainage stand pipe or, alternatively, over the
edge of your sink.
During installation, make sure that:
•
The drainage hose is not kinked or crushed.
•
The hose end, relative to the top surface of the dishwasher (SEE FIGURE BELOW), must be placed
at a height between 32cm and 80cm.
•
The end of the hose must never be immersed in water.
•
The drainage hose must not be extended to more that a maximum length of 1 metre.
extension must have the same internal diameter. Furthermore, the maximum height at which the
hose end can be placed (in the case of an extended tube) must be reduced from 80cm to 50cm.
•
The drainage stand pipe must have an internal diameter of no less than 4 cm.
N
:
OTE
DO NOT EXTEND THE DRAIN HOSE AS THIS CAN AFFECT THE PERFORMANCE OF
.
THE DISHWASHER
dishwasher user manual
28
28
(SEE FIGURE
The
Hide quick links:
Advertisement
Table of Contents
