Baumatic BDW2SS Instruction Manual page 27

BAUMATIC BDW2W / BDW2SS
door spring tension.
• Using an Allen key, rotate the adjusting screw to tighten or slacken
the steel cable. You must do this or damage to your dishwasher
may result.
The door's spring tension is good when the door remains horizontal in the fully
opened position, yet rises to a close with the slight lift of a finger.
Warning
: failure to adjust the door spring
tension could
dishwasher!
d) NEXT, CONNECT THE WATER INLET
BELOW):
Connect the cold water supply hose to a threaded
¾ inch connector and make sure that it is
fastened tightly in place.
Attach tube C to the cold water supply A.
If the water pipes are new or have not been used
for a long time, let the water run to make sure
that the water is clear and free of impurities. The
water inlet may get blocked and damage the
appliance.
dishwasher user manual
result in damage
Make sure the water pressure is the same as the
range indicated on the data tag.
DO NOT CONNECT TO THE HOT
If your appliance is fitted with an aqua stop
system then this must be fitted vertically
(pointing upwards) not downwards or sideways.
27
27
to your
(SEE FIGURE
WATER SYSTEM!