Cleaning The Drum - Baumatic BWD12 Instruction Manual

Cleaning the Cabinet
Clean the exterior surface of your machine with lukewarm water
and a cleaning substance that will not harm or scratch the cabinet.
After rinsing with clean water, wipe it with a soft and dry cloth.
PLEASE NOTE: If your appliance is installed in a location where
the ambient temperature can fall below 0
(once before you know your machine will be unused for a long
time).
o Plug in your Washer-dryer.
o Close the water tap and pull out the water inlet hose or hoses from
the tap.
o Place the ends of the water drain and water inlet hoses in a cup on
the ground.
o Adjust the programme knob to 'Draining' program.
o The 'Program Ready' light will come on.
o Run the programme by pressing the 'Start/Pause' button.
o Unplug your machine when the programme is over (i.e., when the
'program end' light is on).
* When you complete this process, the remaining water inside the
machine will be drained. There will now be no danger of ice forming.
When you use your washing machine again, be sure that the ambient
temperature is above 0

Cleaning the Drum

*PLEASE NOTE: Do not leave metal parts like needles, staples or
coins inside your Washer-dryer. These items cause rust build-up in
the drum. To clean these stains away, use a cleaning substance (that
doesn't have chlorine in it) and follow the manufacturer's guidelines.
Never use dish-washing wires or similarly rough objects.
*REMOVAL OF LIME FROM YOUR MACHINE
If you use the right amount of detergent in your washing machine,
there will be no need for lime removal. However, if you want to use
lime removers, please pay attention to their manufacturers' warnings.
° C.
C, do the following
°
26