Pioneer 434CMX - PDP - 43" Plasma Panel Service Manual page 91

5
GS2: Status information
Order
1 Notifying of switching to Standby mode
2 Whether the unit has already been adjusted or not
3 With/without backup of adjustment data
4 Power-down information
5 Temperature information (TEMP1)
Abnormality in RST2 (power decrease of the
6
DC-DC converter)
7 IC4 communication failure
8 EEPROM communication failure
9 Failure in audio
10 Communication failure of the volume IC
11 Backup-ROM communication failure
12 Failure in temperature information (TEMP1)
13 Activation of panel protection
14 (Reservation)
15 Hour meter
• Power-down information
Power-down point
Data
0 No power-down
1 Not used
2 P-POWER
3 SCAN
4 SCN-5V
5 Y-DRIVE
6 Y-DCDC
7 Y-SUS
8 ADRS
9 X-DRIVE
A X-DCDC
B X-SUS
C DIG-DCDC
D Reservation
E Reservation
F Power-down point not identified
5
6
Data
Size
1 byte
1 byte
1 byte
2 byte
3 byte
1 byte
1 byte
1 byte
1 byte
1 byte
1 byte
1 byte
1 byte
9 byte
7 byte
PDP-434CMX
6
7
Remarks
1: Successfully switched to Standby mode
0: Adjusted, 1: Not adjusted
0: With backup, 1: Without backup
1st byte: 1st PD, 2nd byte: 2nd PD
000 to 255
0: Normal, 1: Shutdown process caused by an abnormality
completed, 2: In the process of displaying a warning against
shutdown caused by an abnormality
0: Panel protection not activated, 1: Panel protection being
activated
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
1st-5th bytes: Hour, 6-7th bytes: Minute
7
8
A
B
C
D
E
F
91
8