Pioneer 434CMX - PDP - 43" Plasma Panel Service Manual page 152

1
INSTALLATION OF THE UNIT
I
nstallation using the supplied display stand
Be sure to fix the supplied stand to the installation surface.
A
Use commercially available M8 bolts that are 25 mm longer
than the thickness of the installation surface.
1. Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
B
Front
5
110 mm (4- /
16
C
2. Set this unit in the stand.
D
E
F
152
1
2
880 mm (34- 3 / in.)
4
(Bolt hole thread pitch)
Rear
in.)
2
3
3. Fix this unit using the supplied washer and bolt.
CAUTION
This display unit weighs at least 32.5kg (71 lbs 10oz)
and has little front-to-back depth, making it very
unstable when stood on edge. As a result, two or
more persons should cooperate when unpacking,
moving, or installing the display.
PDP-434CMX
3
4
1
Use a 6 mm ( / in.) hex
4
wrench to bolt them.
4