Belkin F1PI210ENau User Manual page 48

Appendices
Internet Explorer
1. Open Internet Explorer and click the Stop button. Click
Explorer/Preferences.
2. In the Internet Explorer Preferences window, under Network,
select Proxies.
3. Uncheck all check boxes and click OK.
92
Appendices
Appendix A2 Troubleshooting
This section describes common problems you may encounter and
possible solutions to them. The VoIP Router can be easily monitored
through panel indicators to identify problems.
Troubleshooting
Symptom Action
LED Indicators
POWER LED is Off • Check connections between the VoIP
Router, the external power supply, and the
wall outlet.
• If the power indicator does not turn on when
the power cord is plugged in, you may have
a problem with the power outlet, power cord,
or external power supply. However, if the unit
powers off after running for a while, check
for loose power connections, power losses,
or surges at the power outlet. If you still
cannot isolate the problem, then the external
power supply may be defective. In this case,
contact Technical Support for assistance.
Troubleshooting
Symptom Action
LED Indicators
LAN LED is Off • Verify that the VoIP Router and attached
device are powered on.
• Be sure the cable is plugged into both the
VoIP Router and the corresponding device.
• Verify that the proper cable type is used and
that its length does not exceed the specified
limits.
• Be sure that the network interface on the
attached device is configured for the proper
communication speed and duplex mode.
• Check the adapter on the attached device
and cable connections for possible defects.
Replace any defective adapter or cable if
necessary.
93
1
2
3
4
5
6
7