Belkin F1PI210ENau User Manual page 46

Appendices
Manual IP Configuration
1. Follow steps 1-5 in "DHCP IP Configuration" on the previous
page
2. Select "Use the following IP address." Enter an IP address based
on the default network which is 10.1.1.x (where x is between
2 and 254), use 255.255.255.0 for the subnet mask and the IP
address of the VoIP Router 10.1.1.1 for the default gateway field
88
Appendices
3. Select "Use the following DNS server addresses"
4. Enter the IP address for the VoIP Router in the Preferred DNS
server field. This automatically relays DNS requests to the DNS
server(s) provided by your ISP. also, add a specific DNS server
of your ISP into the Alternate DNS Server field and click OK to
close the dialog boxes
5. For future reference you may record the configured information in
the following table
TCP/IP Configuration Setting
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Default Gateway ____.____.____.____
Preferred DNS Server ____.____.____.____
Alternate DNS Server ____.____.____.____
Disable HTTP Proxy
You need to verify that the "HTTP Proxy" feature of your web browser
is disabled. This is so that your browser can view the VoIP Router's
HTML configuration pages.
6. Open control panel
7. Open internet options
8. Go to the connections tab and click on the LAN settings button
9. Ensure that NOTHING is ticked on this screen and click ok
10. On the connections tab, make sure that there are no dial up
connections, select the "Never dial a connection" radio button
89
1
2
3
4
5
6
7