Belkin F1PI210ENau User Manual page 41

Advanced Setup Method
USB (F1PI242EGau Wireless only)
You can plug-in your USB hard-drive or memory stick and share these
resources to your home network. Once you have plugged in the USB
device you can see the device information in the following "Status"
table.
IMPORTANT: The routers USB port does not support a USB Hub, only
directly connected USB Mass Storage Devices are supported.
File system supporting list: FAT12, FAT16, FAT32. NTFS, Linux ext2
and new WinXP FAT64 are not supported by this router.
Advanced Setup | USB | File Server
This page allows you to enable or disable the File Server features.
NetBIOS/SMB share protocol can be used in Windows
4.0, 2000, XP or other Operating Systems supporting the NetBIOS/
SMB protocol. You need to select which partition (maximum 4
partitions) and folder you want to share. You could specify username,
password and security level for every share resource.
If you see some partitions can not be selected in the partition list
table, check the FTP Server partition share status to make sure you
did not share more than 4 disk partitions at the same time.
78
Advanced Setup Method
Advanced Setup | USB | FTP Server
FTP service is a very common network protocol that enables you to
share your files to a local or public network. By using this feature
you can share any files/folders on your USB hard drive or memory
stick. You need to specify which partition (maximum 4 partitions) and
folders you want to share. You could specify different passwords and
security levels for different users.
Because FTP Server and File Server are share the same partition
share limitation. If you see the error message "Partition share number
exceed" when you select some partitions, check the File Server
partition share status.
95, 98, NT
®
79
1
2
3
4
5
6
7