Belkin F1PI210ENau User Manual page 33

Advanced Setup Method
Use the SNMP configuration screen to display and modify parameters
for the Simple Network Management Protocol (SNMP). A computer
attached to the network, called a Network Management Station
(NMS), can be used to access this information. Access rights to the
agent are controlled by community strings. To communicate with the
VoIP Router, the NMS must first submit a valid community string for
authentication.
Parameter Description
Community A community name authorized for management
access
Access Management access is restricted to Read or Write
Valid Enables or disables the entry
Note: Up to 5 community names may be entered
Trap
Parameter Description
IP Address: Traps are sent to this address when errors or specific
events occur on the network
62
Advanced Setup Method
Community: A community string (password) specified for trap
management. Enter a word, something other than public or private,
to prevent unauthorized individuals from reading information on your
system
Version: Sets the trap status to disabled, or enabled with V1 or V2c
The v2c protocol was proposed in late 1995 and includes
enhancements to v1 that are universally accepted. These include
a get-bulk command to reduce network management traffic when
retrieving a sequence of MIB variables, and a more elaborate set of
error codes for improved reporting to a Network Management Station.
ADSL
ADSL Parameters
We recommend leaving the Operation Mode at the default Automatic
setting unless having line sync issues, to automatically negotiate with
remote DSLAM.
Parameter Description
Operation Mode
• Automatic
63
1
2
3
4
5
6
7