Belkin F5D7632UK4 User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Modem
  5. ADSL Modem with Wireless-G Router F5D7632UK4
  6. User manual

Belkin F5D7632UK4 User Manual

Adsl modem with wireless g router
Hide thumbs Also See for F5D7632UK4:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Network your computers and share your
ADSL Internet access

User Manual

ADSL Modem with
Wireless G Router
802.11g
2.4GHz • Wireless
802.11b
2.4GHz • Wireless
Mbps
F5D7632uk4
Mbps

Advertisement

Table of Contents
loading

Related Manuals for Belkin F5D7632UK4

Summary of Contents for Belkin F5D7632UK4

  • Page 1: User Manual

    Network your computers and share your ADSL Internet access User Manual ADSL Modem with Wireless G Router 802.11g 2.4GHz • Wireless 802.11b 2.4GHz • Wireless Mbps F5D7632uk4 Mbps...

  • Page 2: Table Of Contents

    Benefits of a Home Network ......3 Advantages of a Belkin Wireless Network ....3 2 Make Sure You Have the Following .

  • Page 3: Introduction

    Introduction Thank you for purchasing the Belkin ADSL Modem with Wireless G Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. The following is a list of features that make your Router an ideal solution for your home or small office network.
  • Page 4 Introduction Introduction Integrated 802.11g Wireless Access Point 802.11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802.11b. Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network.

  • Page 5: Benefits Of A Home Network

    – set up and access printers, computers, and other networking devices from anywhere in your home Easy Expansion – the wide range of Belkin networking products let you expand your network to include devices such as printers and gaming consoles No cabling required –...

  • Page 6: Make Sure You Have The Following

    Make Sure You Have the Following Package Contents • ADSL Modem with Wireless G Router • RJ11 Telephone Cord - Gray • RJ45 Ethernet Networking Cable - Yellow • ADSL Microfilter* • Power Adapter • User Manual CD *ADSL microfilter varies by country. If it’s not included, you will need to purchase one.

  • Page 7: Knowing Your Router

    Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status.
  • Page 8 Knowing your Router Internet LED The Internet LED shows you when the Router is connected to the Internet. When the LED is OFF, the Router is NOT connected to the Internet. When the LED is solid GREEN, the Router is connected to the Internet.
  • Page 9 Knowing your Router Back Panel Ethernet Ports The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. Connect your network-enabled computers or any networking devices to one of these ports. Reset Button The “Reset”...

  • Page 10: Connecting Your Router

    Connecting your Router Positioning your Router Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router connected devices increases.

  • Page 11: Connecting Your Computers

    Connecting your Router Connecting your Computers Power off your computers and networking equipment. Connect your computer to one of the yellow RJ45 ports on the rear of the Router labeled “connections to your computers” by using an Ethernet networking cable (one Ethernet network cable is supplied).

  • Page 12: Connecting Your Adsl Line

    Connecting your Router Connecting your ADSL Line Connection for the Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line.
  • Page 13 Connecting your Router Note: One RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. If your have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the gray RJ11 port labeled “DSL line”...

  • Page 14: Powering Up Your Router

    Connecting your Router Powering Up your Router Connect the supplied power adapter to the Router power-input plug labeled “Power”. Note: For safety and performance reasons, only use the supplied power adapter to prevent damage to the Router. After connecting the power adapter and the power source is turned on, the Router’s power icon be on.

  • Page 15: Setting Up Your Computers

    Setting Up your Computers In order for your computer to properly communicate with your Router, you will need to change your computer’s “TCP/IP Ethernet” settings to “Obtain an IP address automatically/Using DHCP”. This is normally the default setting in most home computers. You can set up the computer that is connected to the ADSL modem FIRST using these steps.
  • Page 16 Setting Up your Computers Manually Configuring Network Adapters in Windows 98SE or Me Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. Select “TCP/IP -> settings” for your installed network adapter. You will see the following window. If “Specify an IP address”...
  • Page 17 Setting Up your Computers Set up the computer that is connected to the cable or DSL modem by FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet.
  • Page 18 Setting Up your Computers If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router. Close the window. If you made any changes, the following window will appear. Click “Save”. Restart the computer.
  • Page 19 Setting Up your Computers Manually Configuring Network Adapters in Mac OS X Click on the “System Preferences” icon. Select “Network” (1) from the “System Preferences” menu. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
  • Page 20 Setting Up your Computers Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password.

  • Page 21: Recommended Web Browser Settings

    Setting Up your Computers Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browser’s settings to the recommended settings in this section.
  • Page 22 Setting Up your Computers Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet Options” page. Netscape Navigator 4.0 or Higher Start Netscape.

  • Page 23: Configuring Your Router With The Setup Wizard

    Configuring your Router with the Setup Wizard Running the Setup Wizard You can access the web-based management user interface of the Router using the Internet browser on a computer connected to the Router. Type “192.168.2.1” (do not type in anything else such as “http://”...
  • Page 24 Configuring your Router with the Setup Wizard A Status page will follow showing detail status of your Router. Next, click on the “Setup Wizard” button for express configuration (recommended). Click on the “Setup Wizard” button to start the Router’s Setup Wizard.
  • Page 25 Configuring your Router with the Setup Wizard Next, select your connection type (this information is provided by your ISP) and click “Next”. For a list of common ISP settings turn to page 83 Now enter the required values provided by your ISP. For the “PPPoE”...
  • Page 26 Configuring Your Router with the Setup Wizard Double-check the settings shown on the following screen. You can click “Back” to change the settings or click “Apply” to activate your settings. Note: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting.

  • Page 27: Connecting To The Wireless Lan

    Please read the User Manual for details on levels of wireless security and how to change your security settings. Congratulations! You have finished installing your new Belkin Router. To test your Internet connection, open your browser and visit any website, such as www.belkin.com.

  • Page 28: Manually Configuring Your Router

    Manually Configuring your Router Manually Configuring your Router Understanding the Web-Based User Interface The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. (10) Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links.
  • Page 29 Manually Configuring your Router button will change to read “Logout”. Logging into the Router will take you to a separate login page where you will need to enter a password. When you are logged into the Router, you can make changes to the settings.

  • Page 30: Changing Lan Settings

    Manually Configuring your Router Manually Configuring your Router Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. LAN Settings Clicking on the header of the LAN tab tab’s header page. A quick description of the functions can be found here.
  • Page 31 10.x.x.x (where x is anything between 0 and 255) Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically.
  • Page 32 IP address to change. Local Domain Name The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as “MY NETWORK”.

  • Page 33: Internet Wan

    Manually Configuring your Router Internet WAN The “Internet WAN” tab is where you will set up your Router to connect to your Internet Service Provider. The Router is capable of connecting to virtually any ADSL Service Provider’s system provided you have correctly configured the Router’s settings for your ISP’s connection type.
  • Page 34 Manually Configuring your Router Manually Configuring your Router Connection Type From the “Connection Type” page, you can select one of these five connection types based on the instruction provided by your ISP: • PPPoE • PPPoA • Dynamic IP (1483 Bridged) •...
  • Page 35 Manually Configuring your Router (10) 1. User Name - Enter the user name. (Assigned by your ISP). 2. Password - Enter your password. (Assigned by your ISP). 3. Retype Password - Confirm the password. (Assigned by your ISP). 4. IP Assigned by ISP - Select “Yes”...
  • Page 36 Manually Configuring your Router Manually Configuring your Router Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISP’s network together. The Router will obtain an IP address automatically from your ISP’s DHCP server. 1.
  • Page 37 Manually Configuring your Router Setting your ISP Connection to Static IP (IPoA) This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet. 1. IP Address – Enter an IP address assigned by your ISP for the Router WAN interface.
  • Page 38 DNS (Domain Name Server) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many ISPs do not require you to enter this information into the Router. The “Automatic from ISP” box if your ISP did not give you a specific DNS address.

  • Page 39: Wireless

    Manually Configuring your Router Wireless The “Wireless” tab lets you make changes to the wireless network settings. From this tab, you can make changes to the wireless network name (SSID), operating channel, and encryption security settings. Channel and SSID 1. Changing the Wireless Channel There are a number of operating channels you can choose from.
  • Page 40 Manually Configuring your Router Manually Configuring your Router match that of another wireless network in the area). To change the SSID, type in the SSID that you want to use in the SSID field click “Apply Changes” . The change is immediate. If you make a change to the SSID, your wireless-equipped computers may also need to be reconfigured to connect to your new network name.
  • Page 41 Belkin 802.11g Wireless Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Only Belkin 802.11g clients support WPA at this time. There are two types of WPA security: WPA-PSK (no server) and WPA (with server).
  • Page 42 Manually Configuring your Router Manually Configuring your Router Setting WPA-PSK (no server) From the “Security Mode” drop-down menu, select “WPA-PSK (no server)”. Enter your pre-shared key. This can be from eight to 40 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up.
  • Page 43 Manually Configuring your Router Setting WEP Encryption Note to Mac users: The passphrase option will not operate with Apple AirPort . To configure encryption for your Mac computer, set the ® ® encryption using the manual method described in the next section. Select “128-bit WEP”...
  • Page 44 Manually Configuring your Router Manually Configuring your Router Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters from A–F and 0–9. 64-bit keys are five two-digit numbers. 128-bit keys are 13 two-digit numbers. For instance: AF 0F 4B C3 D4 = 64-bit key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key In the boxes below, make up your key by writing in two characters...

  • Page 45: Firewall

    Manually Configuring your Router Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack • Ping of Death (PoD) • Denial of Service (DoS) •...
  • Page 46 Manually Configuring your Router Manually Configuring your Router Application Gateways Settings Application gateways let you select ports to be open for certain applications to work properly with the Network Address Translation (NAT) feature of the Router. A list of popular applications has been included to choose from.
  • Page 47 Manually Configuring your Router Virtual Servers Virtual servers allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be “seen”.
  • Page 48 Manually Configuring your Router Manually Configuring your Router Access Control Access control allows users to define the outgoing traffic permitted or denied access through the WAN interface. The default is to permit all outgoing traffic. To configure restrictive access to your computers, do the following: Click “Add PC”...
  • Page 49 Manually Configuring your Router URL Blocking To configure the URL blocking feature, specify the websites (www.somesite.com) and or keywords you want to filter on your network. Click “Apply Changes” to activate the change. To complete this configuration, you will need to create or modify an access rule in the “Client IP filters”...
  • Page 50 Manually Configuring your Router Manually Configuring your Router Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the schedule on the “Schedule Rule”, and apply the rule on the “Access Control”...
  • Page 51 Manually Configuring your Router MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access.
  • Page 52 Manually Configuring your Router Manually Configuring your Router DMZ (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application.

  • Page 53: Utilities

    Manually Configuring your Router Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions.
  • Page 54 Manually Configuring your Router Manually Configuring your Router Restart Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings. Restarting the Router to Restore Normal Operation Click the “Restart Router”...
  • Page 55 Manually Configuring your Router Saving/Backup Current Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
  • Page 56 Manually Configuring your Router Manually Configuring your Router A window will open that allows you to select the location in which to save the configuration file. Select a location. There are no restrictions on the file name, however, be sure to name the file so you can locate it yourself later.
  • Page 57 Manually Configuring your Router Restore Previous Settings This option will allow you to restore a previously saved configuration. Click “Browse”. A window will open that allows you to select the location of the configuration file. All configuration files end with a “.bin”.
  • Page 58 Manually Configuring your Router Manually Configuring your Router Firmware Update From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to the latest version.
  • Page 59 Manually Configuring your Router System Settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the UPnP function of the Router. Setting or Changing the Administrator Password The Router ships with NO password entered.
  • Page 60 Internet and get a response. You cannot set the clock yourself. Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router’s settings from anywhere on the Internet.
  • Page 61 Manually Configuring your Router Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in a specific way to operate...

  • Page 62: Troubleshooting

    Troubleshooting Problem: The ADSL LED is not on. Solution: Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line”. Make sure the Router has power. The Power LED panel should be illuminated.
  • Page 63 Solution: If you are unable to connect to the Internet from a wireless computer, please check the following items: Look at the lights on your Router. If you are using a Belkin Router, the lights should be as follows: •...
  • Page 64 Troubleshooting Does the name of your wireless network appear in the results? Yes, my network name is listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, but my network name is listed”. No, my network name is not listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, and my network name is not listed”.
  • Page 65 This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem: My wireless network performance is inconsistent. Data transfer is sometimes slow.
  • Page 66 Range Extender/Access Point that can be connected wirelessly to a Belkin 802.11g Wireless Router, without requiring an Ethernet cable or powerline Ethernet adapters. These Belkin products are available at your local retailer, or can be ordered from Belkin directly. For network/range extension information, please visit: www.belkin.
  • Page 67 Troubleshooting Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point. Solution Log into your Wireless Router or Access Point. Open your web browser and type in IP address of the Wireless Router or Access Point.
  • Page 68 C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Click “OK”, and then “Apply” to save the settings. If you are NOT using a Belkin Wireless Card, please consult the manufacturer for that wireless client card’s user manual.
  • Page 69 You also need to download the latest driver for your Belkin Wireless 802.11g Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products.
  • Page 70 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access Point for a home network. Solution: From the “Security Mode” drop-down menu, select “WPA-PSK (no server)”. For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up.
  • Page 71 Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network. Solution: Clients must use the same key that the wireless router or access point uses. For instance if the key is “Smith Family Network Key” in the wireless router or access point, the clients must also use that same key.
  • Page 72 Click “OK, then “Apply” to save the settings. Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security and I am NOT using a Belkin Wireless Card for a home network. Solution: If you are NOT using a Belkin Wireless Desktop or Wireless Notebook Network Card and it is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch...
  • Page 73 Troubleshooting Supported Operating Systems: • Windows XP Professional • Windows XP Home Edition Enabling WPA-PSK (no server) Under Windows XP, click “Start > Control Panel > Network Connections”. Right-clicking on the “Wireless Networks” tab will display the following screen. Ensure the “Use Windows to configure my wireless network settings”...
  • Page 74 Troubleshooting What’s the difference between 802.11b, 802.11g, 802.11a, and Pre-N? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11(x), so named by the IEEE, the board that is responsible for certifying networking standards.

  • Page 75: Technical Support Information

    Technical Support Information Technical Support For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin.com/networking Europe: 00 800 223 55 460 or contact:...

  • Page 76: Appendix

    DNS is an acronym for Domain Name Server. A Domain Name Server is a server located on the Internet that translates URLs (Universal Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you...
  • Page 77 Appendixes You have to double-click on a desktop icon other than your browser to get on the Internet. To set the Router to use PPPoE, type in your user name and password in the spaces provided. After you have typed in your information, click “Apply Changes”.
  • Page 78 This occurs if the computer’s SSID is set to “ANY”. Your Belkin Router can block this random search for a network. If you disable the “ESSID Broadcast” feature, the only way a computer can join your network is by its SSID being set to the specific name of the network (like WLAN).
  • Page 79 Appendixes Virtual Servers This function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be “seen”.
  • Page 80 Appendixes MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access.
  • Page 81 Appendixes Assuming the time-out is set to 10 minutes, then 10 minutes after you leave, the login session will expire. You will have to log into the Router again to make any more changes. The login time-out option is for security purposes and the default is set to 10 minutes. Note, only one computer can be logged into the Router’s advanced setup interface at a time.

  • Page 82: Appendix B: Important Factors For Placement And Setup

    To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •...
  • Page 83 Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual.

  • Page 84: Appendix C: Internet Connection Setting Table

    These guidelines should allow you to cover the maximum possible area with your wireless router (or access point). Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point. 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important.
  • Page 85 Appendixes Country Connection VPI/VCI Protocol Europe France PPPoE 8/35 Germany PPPoE 1/32 Holland 1483 0/35 Bridged 0/32 0/34 PPPoA 8/48 PPPoA 0/32 PPPoE 8/35 Belgium PPPoA 8/35 Italy PPPoE or 8/35 PPPoA Spain PPPoE or 8/32 1483 Bridged Sweden 1483 3/35 Bridged PPPoA...

  • Page 86: Information

    This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Belkin declared that F5D7632-4 is limited in CH1~11 from 2400 to 2483.5 MHz by specified firmware controlled in USA.
  • Page 87 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 &...
  • Page 88 Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
  • Page 89 +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax © 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

This manual is also suitable for:

F5d7632F5d7632-4

Table of Contents