Belkin F5D7632uk4A User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Modem
  5. F5D7632uk4A
  6. User manual

Belkin F5D7632uk4A User Manual

Adsl2+ modem with wireless g router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ADSL2+ Modem with
Wireless G Router

User Manual

F5D7632uk4A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F5D7632uk4A and is the answer not in the manual?

Questions and answers

Related Manuals for Belkin F5D7632uk4A

Summary of Contents for Belkin F5D7632uk4A

  • Page 1: User Manual

    ADSL2+ Modem with Wireless G Router User Manual F5D7632uk4A...

  • Page 3: Table Of Contents

    Table of Contents 1. Introduction Product Features Benefits of a Home Network Advantages of a Belkin Wireless Network 2. Make Sure You Have the Following Package Contents System Requirements Setup Assistant Software System Requirements Internet Connection Settings 3 Knowing your Router 4 Connecting and Configuring your Router Step 1A: Hardware Connections –...

  • Page 5: Introduction

    Introduction Thank you for purchasing the Belkin ADSL2+ Modem with Wireless G Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. The following is a list of features that make your Router an ideal solution for your home or small office network.
  • Page 6 Introduction Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup.

  • Page 7: Benefits Of A Home Network

    Introduction Benefits of a Home Network By following our simple setup instructions, you will be able to use your Belkin home network to: • Share one high-speed Internet connection with all the computers in your home • Share resources, such as files, and hard drives among all the connected computers in your home •...

  • Page 8: Make Sure You Have The Following

    ADSL Microfilter* • Power Adapter • User Manual and Belkin Setup Assistant Software on CD-ROM *ADSL microfilter varies by country. If it’s not included, you will need to purchase one. System Requirements • An active ADSL service with a telephone wall jack for connecting the Router •...

  • Page 9: Knowing Your Router

    Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status.
  • Page 10 Knowing your Router Color Status Description ADSL ���� �������� ��� ��������������� Green Power off or ADSL line connection is physically disconnected Blinking Handshaking or training is in progress Solid ADSL line connection is OK Wireless Green Power off or no radio signal (WLAN card is not present or fails to function) Blinking Traffic is going through wireless LAN interface...
  • Page 11 Knowing your Router Rear Panel The following figure illustrates the rear panel of your Router. (8) (7) ����� ���� ����������� �� ���� ��������� ��� ���� �� ��������� ����� Power Plug — Connect the included power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router.

  • Page 12: Connecting And Configuring Your Router

    Connecting and Configuring your Router Setup Assistant Belkin has provided Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your Windows 2000, XP, or Vista™ computer be connected directly to your ADSL and that the Internet connection is active and working at the time of installation.

  • Page 13: Step 1B: Replacing An Existing Modem Or Modem Route

    Connecting and Configuring your Router 1A.4 Plug your Router’s power supply into the black port labeled “Power” on the back of your Router. Wait 20 seconds for the Router to start up. Look at the display on the front of the Router. Make sure the “Wired” and “Modem-Router”...

  • Page 14: Step 2: Set Up The Router - Run The Setup Assistant Software

    Connecting and Configuring your Router Step 2: Set Up the Router – Run the Setup Assistant Software 2.1 Shut down any programs that are running on your computer at this time.Turn off any firewall or Internet-connection-sharing software on your computer. 2.2 Insert the CD into your computer.
  • Page 15 Connecting and Configuring your Router 2.7 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection. 2.8 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect.
  • Page 16 Connecting and Configuring your Router Congratulations You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website.

  • Page 17: Manually Configuring Your Router

    Manually Configuring your Router Understanding the Web-Based User Interface The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. Using Web-Based Manager Once your host PC is properly configured, start your web browser and type the private IP address of the Router into the URL field: “192.168.2.1”...

  • Page 18: Internet Settings

    Manually Configuring your Router 5. Internet Status Indicator This indicator is visible in all pages of the Router, showing the connection status of the Router. When the indicator says “connection OK” in GREEN, the Router is connected to the Internet. When the Router is not connected to the Internet, the indicator will read “no connection”...

  • Page 19: Changing Lan Settings

    192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255) Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router.

  • Page 20: Dhcp Client List

    Manually Configuring your Router DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be turned OFF if necessary; however, in order to do so, you must manually set a static IP address for each computer on your network.

  • Page 21: Internet Wan

    Manually Configuring your Router Internet WAN The “Internet WAN” tab is where you will set up your Router to connect to your Internet Service Provider (ISP). The Router is capable of connecting to virtually any ADSL Service Provider’s system provided you have correctly configured the Router’s settings for your ISP’s connection type.
  • Page 22 Manually Configuring your Router Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to access the network of your ISP for connecting to the Internet. PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK.
  • Page 23 Manually Configuring your Router 5. VPI/VCI — Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). 6. Encapsulation — Select your encapsulation type (supplied by your ISP) to specify how to handle multiple protocols at the ATM transport layer. VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads.
  • Page 24 Manually Configuring your Router 1. IP Assigned by ISP — Leave “Yes” if your ISP automatically assigns an IP address. If your ISP assigned a fixed IP address, select “No” and enter assigned values. 2. VPI/VCI — Enter your VPI and VCI parameter here. These identifiers are assigned by your ISP.
  • Page 25 DNS (Domain Name Server) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many ISPs do not require you to enter this information into the Router. The “Automatic from ISP”...
  • Page 26 Manually Configuring your Router Using DDNS (Dynamic DNS) The DDNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org offers, allowing your network computers to be more easily accessed from various locations on the Internet. DynDNS.org provides this service, for up to five host names, free to the Internet community.

  • Page 27: Wireless

    Manually Configuring your Router Wireless The “Wireless” tab lets you make changes to the wireless network settings. From this tab, you can make changes to the wireless network name (SSID), operating channel, and encryption security settings. Channel and SSID 1. Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used.
  • Page 28 Manually Configuring your Router 3. Using the Wireless Mode Switch Your Router can operate in three different wireless modes: “Mixed (11b+11g)”, “11g Only”, and “11b Only”. The different modes are explained below. Mixed (11b+11g) Mode In this mode, the Router is compatible with 802.11b and 802.11g wireless clients simultaneously.

  • Page 29: Encryption/Security

    Manually Configuring your Router Encryption/Security Securing your Wi-Fi Network Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home-office, and small-office user. At the time of this User Manual’s publication, there are four encryption methods available.
  • Page 30 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After selecting either the “64-bit” or “128-bit WEP” encryption mode, it is critical that you generate an encryption key.
  • Page 31 IMPORTANT: You also need to ensure that all your wireless client cards and adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin wireless cards have updated drivers available for download from the Belkin support site: www.belkin.com/networking. For a list of Belkin wireless products that support WPA/WPA2, please visit our website at www.
  • Page 32 Manually Configuring your Router Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters from A–F and 0–9. 64-bit keys are five 2-digit numbers. 128-bit keys are 13 2-digit numbers. For instance: AF 0F 4B C3 D4 = 64-bit key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key In the boxes below, make up your key by writing in two characters between A–F and 0–9 in each box.
  • Page 33 Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products.
  • Page 34 Manually Configuring your Router 4. Click “Apply Changes” to finish. You must now set all clients to match these settings. Setting WPA/WPA2 (with radius server) Settings If your network uses a radius server to distribute keys to the clients, use this setting.
  • Page 35 Router. Configuring your Belkin Wireless G Network Cards to Use Security Note: This section provides information on how to configure your Belkin Wireless G Network Cards to use security. At this point, you should already have your Wireless Router or access point set to use WPA or WEP.
  • Page 36 Manually Configuring your Router Important: A WEP key is a mixture of numbers and letters from A–F and 0–9. For 128-bit WEP, you need to enter 26 keys. For 64-bit WEP, you need to enter 10 keys. This network key needs to match the key you assign to your Router. 6.
  • Page 37 Manually Configuring your Router 5. Click “OK” to save the settings. Connecting your Computer to a Wireless Network that Requires WPA (with radius server) 1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your wireless card.
  • Page 38 Cards that are NOT Manufactured by Belkin For WPA wireless desktop and wireless notebook cards that are NOT manufactured by Belkin and that are not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access” is available as a free download.

  • Page 39: Wireless Range Extension And Bridging

    Note: Please make sure to download the latest firmware version for the Router for optimal performance at: http://web.belkin.com/support. Adding Another Network Segment Wirelessly Connecting a network switch or hub to the Router’s RJ45 jack will allow a number...
  • Page 40 Manually Configuring your Router Setting up a Bridge Between your Router and a Secondary Access Point Bridging your Belkin Router to a secondary access point requires that you access the Router’s Advanced Setup Utility and enter the MAC address of the access point in the appropriate area.

  • Page 41: Firewall

    Manually Configuring your Router 8. In the field named “AP1” (3), type in the MAC address of your secondary access point. When you have typed in the address, click “Apply Changes”. 9. Bridging is now set up. Note: It may take up to a minute for the bridged connection to properly establish itself.
  • Page 42 Manually Configuring your Router Virtual Servers Virtual servers allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be “seen”.
  • Page 43 Manually Configuring your Router Access Control Access control allows users to define the outgoing traffic permitted or denied access through the WAN interface. The default is to permit all outgoing traffic. To configure restrictive access to your computers, do the following: 1.
  • Page 44 Manually Configuring your Router Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the schedule on the “Schedule Rule”, and apply the rule on the “Access Control” page. Follow these steps to add a schedule: 1.
  • Page 45 Manually Configuring your Router Setting MAC-Address Filtering The MAC-address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client (computer) on your network to allow network access to each.
  • Page 46 Manually Configuring your Router To put a computer in the DMZ, enter the last digits of its IP address in the IP field and select “Enable”. Click “Apply Changes” for the change to take effect. If you are using multiple static WAN IP addresses, it is possible to select to which WAN IP address the DMZ host will be directed.

  • Page 47: Utilities

    Manually Configuring your Router Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router At times it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings.
  • Page 48 Manually Configuring your Router 1. Click the “Restore Defaults” button. 2. The following message will appear. Click “OK” to restore factory defaults. Saving/Backing up Current Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed.
  • Page 49 2. Then, click “Open”. Updating Firmware From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin website and update your Router’s firmware to the latest version.
  • Page 50 Manually Configuring your Router 3. When the save is complete, you will see the following window. Click “Close”. The download of the firmware is complete. To update the firmware, follow the next steps in “Updating the Router’s Firmware”. Updating the Router’s Firmware 1.
  • Page 51 Manually Configuring your Router 4. You will be asked if you are sure you want to continue. Click “OK”. 5. You will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted.
  • Page 52 Manually Configuring your Router Setting or Changing the Administrator Password The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it if you need to log in to the Router in the future. It is also recommended that you set a password if you plan to use the remote- management feature of your Router.
  • Page 53 Manually Configuring your Router Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router’s settings from anywhere on the Internet.
  • Page 54 Manually Configuring your Router Enabling/Disabling Universal Plug-and-Play (UPnP) UPnP is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly.

  • Page 55: Manually Configuring Network Adapters

    Manually Configuring Network Adapters Windows XP, 2000, or NT 1. Click “Start”, “Settings”, then “Control Panel”. 2. Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP). 3. Right-click on the “Local Area Connection” associated with your network adapter and select “Properties”...
  • Page 56 Manually Configuring Network Adapters 6. If not already selected, select “Obtain an IP address automatically” (1) and “Obtain DNS server address automatically” (3). Click “OK”. Your network adapter(s) are now configured for use with the Router. Windows 98SE or Me 1.
  • Page 57 Manually Configuring Network Adapters 3. Next to “Configure” (2) [Designer: pls callout (2) in the screenshot above], if “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.
  • Page 58 Manually Configuring Network Adapters 2. Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ethernet” (2) next to “Show” in the “Network” menu. 4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE”...

  • Page 59: Recommended Web Browser Settings

    Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section.
  • Page 60 Recommended Web Browser Settings Netscape® Navigator® 4.0 or Higher 1. Start Netscape. Click on “Edit”, then “Preferences”. 2. In the “Preferences” window, click on “Advanced”, then select “Proxies”. In the “Proxies” window, select “Direct connection to the Internet”.

  • Page 61: Troubleshooting

    Troubleshooting Problem: The ADSL LED is not on. Solution: 1. Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line”. 2. Make sure the Router has power. The [Insert: Power Icon] Power LED on the front panel should be illuminated.
  • Page 62 If you are unable to connect to the Internet from a wireless computer, please check the following items: 1. Look at the lights on your Router. If you’re using a Belkin Router, the lights should be as follows: • The “Power” light should be on.
  • Page 63 “Broadcast SSID” is enabled. This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem: My wireless network performance is inconsistent.
  • Page 64 How do I extend the range of my wireless network? Solution: Belkin recommends using one of the following products to extend wireless network coverage throughout large homes or offices: • Wireless Access Point: A wireless access point can effectively double the...
  • Page 65 Access Point that can be connected wirelessly to a Belkin 802.11g Wireless Router, without requiring an Ethernet cable or powerline Ethernet adapters. These Belkin products are available at your local retailer, or can be ordered from Belkin directly. For network/range extension information, please visit: www.belkin.com/...
  • Page 66 For example: C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key 8. Click “OK”, and then “Apply” to save the settings. If you are NOT using a Belkin Wireless Card, please consult the manufacturer for that card’s user manual.
  • Page 67 Download the patch here: http://www.microsoft.com/downloads/details.aspx?FamilyID=009d8425-ce2b- 47a4-abec-274845dc9e91&displaylang=en You also need to download the latest driver for your Belkin 802.11g Wireless Desktop Network Card or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products.
  • Page 68 2. The “Advanced” button will allow you to view and configure more options of the Card. 3. Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card.
  • Page 69 2. The “Advanced” button will allow you to view and configure more options of the Card. 3. Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card.
  • Page 70 Troubleshooting 2. Right-clicking on the “Wireless Networks” tab will display the following screen. Ensure the “Use Windows to configure my wireless network settings” box is checked. 3. Under the “Wireless Networks” tab, click the “Configure” button. 4. For a home or small business user, select “WPA-PSK” under “Network Administration”.
  • Page 71 Troubleshooting Wireless Comparison Chart Wireless 802.11b G (802.11g) G Plus G Plus MIMO N1 MIMO Technology (802.11g (802.11g with (draft 802.11n with HSM) MIMO MRC) with MIMO) Speed 11Mbps link 5x faster than 10x faster than 10x faster than Wired speed rate/baseline 802.11b 802.11b...

  • Page 72: Technical-Support Information

    *National call rates may apply You can find additional support information on our website www.belkin. com through the tech-support area. If you want to contact technical support by phone, please call the number you need from the list below*.

  • Page 73: Appendixes

    DNS is an acronym for Domain Name Server. A Domain Name Server is a server located on the Internet that translates URLs (Universal Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you are using a static IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly.
  • Page 74 This occurs if the computer’s SSID is set to “ANY”. Your Belkin Router can block this random search for a network. If you disable the “ESSID Broadcast” feature, the only way a computer can join your network is by its SSID being set to the specific name of the network (like WLAN).
  • Page 75 Appendix A: Glossary Encryption Setting encryption can help keep your network secure. The Router uses Wired Equivalent Privacy (WEP) encryption to protect your data and features two rates of encryption: 64-bit and 128-bit. Encryption works on a system of keys. The key on the computer must match the key on the Router, and there are two ways to make a key.
  • Page 76 Appendix A: Glossary URL Blocking To configure the URL-blocking feature, specify the websites (www.somesite.com) and/or keywords you want to filter on your network. Click “Apply Changes” to activate the change. To complete this configuration, you will need to create or modify an access rule in the client IP filters section.

  • Page 77: Administrator Password

    Appendix A: Glossary Administrator Password The Router ships with NO password entered. If you wish to add a password for more security, you can set a password from your Router’s web-based user interface. Keep your password in a safe place as you will need this password if you need to log into the Router in the future.

  • Page 78: Appendix B: Important Factors For Placement And Setup

    To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •...
  • Page 79 For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. These guidelines should allow you to cover the maximum possible area with your wireless router (or access point).
  • Page 80 Appendix B: Important Factors for Placement and Setup A second alternative is to change your computer’s power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting under Windows, see the “Power Options”...

  • Page 81: Information

    Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7632uk4A to which this declaration relates, complies with Part 15 of the FCC Rules.
  • Page 82 Information Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin International, Inc., may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.

  • Page 83: Ec Declaration Of Conformity

    Information EC Declaration of Conformity to R&TTE Directive 1999/5/EC Manufacturer BELKIN LTD, EXPRESS BUSINESS PARK, SHIPTON WAY ,RUSHDEN NN10 6GL ENGLAND Representative lkin Ltd (residing in the EC holding the TCF) Product / Apparatus ADSL Modem/Wireless G Router Type Number...
  • Page 84 Belkin International, Inc., warrants the Belkin product for the lifetime of the product. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin International, Inc., for inspection upon Belkin’s request at the sole...
  • Page 85 INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
  • Page 86 +39 02 862 719 fax +31 (0) 20 654 7349 fax © 2007 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac, Mac OS, Apple, and AirPort are trademarks of Apple Inc., registered in the U.S.

This manual is also suitable for:

F5d7632-4

Table of Contents