Page 1
TSG-ANZ-VHD-12 Page 1 of 4 Self Help Guide Upgrading the Firmware on your Belkin VoIP Router Step 1 Open Internet Explorer and type in the Address Bar (You will be presented with the following screen) Step 2 In the password field type in admin and click LOGIN...
Page 2
Self Help Guide Step 4 Click Tools then Firmware Upgrade (You will be presented with the following screen) Step 5 Click Browse, find the file in c:\Belkin\F1PI242EGau (You will be presented with the following screen) Step 6 Click Open Step 7 Click Upgrade Firmware, then OK...
Page 3
Step 5 Place the Dot next to Restore Router to Factory Defaults and click Next Step 6 Click APPLY (You will be presented with the following screen) If you still require further assistance contact Belkin Technical Support http://10.1.1.1 Call: 1300 554 780 Visit: www.belkin.com/au/support...
Page 4
Step 3 Under ADSL Parameter Setting Enter your Username and Password into the fields (You will be presented with the following screen) Step 4 Click Save Settings If you still require further assistance contact Belkin Technical Support http://10.1.1.1 Call: 1300 554 780 Visit: www.belkin.com/au/support...