Configure The Quarantine Settings - NETGEAR UTM9S Reference Manual

3. Enter the settings as explained in the following table:
Table 102. ReadyNAS Integration screen settings
Setting
ReadyNAS Server
ReadyNAS Username
ReadyNAS Password
1. Click Apply to save your settings.
Note: For additional information about how to set up a UTM9S with a
ReadyNAS, see

Configure the Quarantine Settings

You can apply the quarantine settings only after you have integrated a ReadyNAS with the
UTM9S (see the previous section).

To configure the quarantine settings:
1. Select Administration > ReadyNAS Integration > Quarantine Settings. The
Quarantine Settings screen displays:
Figure 250.
2. To enable the UTM9S to quarantine files, select the Yes radio button.
ProSecure Unified Threat Management (UTM) Appliance
Description
The IP address of the ReadyNAS server.
The user name to access the ReadyNAS. By default, the user name is admin.
The password to access the ReadyNAS. By default, the password is netgear1.
Appendix D, ReadyNAS
Network and System Management
Integration.
416