NETGEAR UTM9S Reference Manual page 244

To configure a VPN client tunnel, follow the steps in the following sections:
• Use the VPN Wizard to Configure the Gateway for a Client Tunnel
• Use the NETGEAR VPN Client Wizard to Create a Secure Connection
Manually Create a Secure Connection Using the NETGEAR VPN Client
Use the VPN Wizard to Configure the Gateway for a Client Tunnel

To set up a client-to-gateway VPN tunnel using the VPN Wizard:
1. Select VPN > IPSec VPN > VPN Wizard. The VPN Wizard screen displays (see the
following figure, which contains an example for a multiple WAN port model). The WAN
radio drop-down lists are shown on the VPN Wizard screen for the multiple WAN port
models but not on the VPN Wizard screen for the single WAN port models.
Figure 142.
To display the wizard default settings, click the VPN Wizard default values option arrow
in the upper right of the screen. A pop-up screen displays (see
showing the wizard default values. After you have completed the wizard, you can modify
these settings for the tunnel policy that you have set up.
ProSecure Unified Threat Management (UTM) Appliance
Virtual Private Networking Using IPSec Connections
244
on page 244.
on page 246 or
on page 251.
Figure 138 on page 241),