Configure Radius Vlans - NETGEAR UTM9S Reference Manual

Configure RADIUS VLANs

You can use a RADIUS virtual LAN (VLAN) to set web access exceptions and provide an
added layer of security.

To do so, follow this procedure:
1. Specify a RADIUS server (see
2. Create a RADIUS domain (see
3. Add a RADIUS virtual LAN (VLAN) (see the information in this section).
Note: The VLAN ID or name should be same as the VLAN ID or name that
is configured on the RADIUS server.
4. Define web access exceptions for the users that are member of the RADIUS VLAN (see
Web Access Exception Rules

To configure a RADIUS VLAN:
1. Select Users > Radius VLAN List. The List of VLAN screen displays. (The following
figure contains one VLAN as an example.)
Figure 230.
The List of VLAN table displays the following fields:
• Domain. The RADIUS domain.
• VLAN ID/Name. The identifier or name for the VLAN.
• Brief Description. An optional brief description of the VLAN.
• Action. The Delete table button, which allows you to delete the VLAN.
2. Add a VLAN by specifying the VLAN in the Add New VLAN ID/Name section of the screen:
a. Select a RADIUS VLAN from the Domain drop-down list.
b. In the VLAN ID/Name field, enter the identifier or the name of the VLAN.
ProSecure Unified Threat Management (UTM) Appliance
RADIUS Client Configuration
Configure Domains
on page 221).
Managing Users, Authentication, and VPN Certificates
on page 353).
376
on page 279).
Set