Capacitance Specifications; Harmonic Ratio Specifications - Agilent Technologies U1241B User's Manual And Service Manual

Capacitance Specifications

Table 6-11 Capacitance specifications with accuracy of ± (% of reading + No. of Least
[1] Use the null operation to zero out residual offset before measuring the signal (by opening the test
leads).

Harmonic Ratio Specifications

Table 6-12 Harmonics ratio specifications
[1] Overload protection: 1000 V R.M.S. for circuits < 0.3 A short circuit current. The accuracy is
[2] Pure sinusoidal waveforms without harmonics have a harmonics ratio of 0%, higher the harmonics
U1241B/U1242B User's and Service Guide
Significant Digit)
Function Range
1000.0 nF
[1]
Capacitance
10.000 μF
100.00 μF
1000.0 μF
10.000 mF
Function
Harmonic ratio
calculated based on the film capacitor. Use Relative mode for residual value.
ratio, more harmonics are present in the sinusoidal waveform.
Specifications and Characteristics
Resolution
0.1 nF
0.001 μF
0.01 μF
0.1 μF
0.001 mF
[2] Frequency
Range
0.0% – 99.9% 40 Hz – 500 Hz
Accuracy
1.2 % + 4
2% + 4
Voltage
100 mVAC – 1000 VAC
6
63