3
Default Setting Configurations
Setting Configurations
1 Turn off the multimeter.
2 From OFF position, press and hold
After you hear a beep, the multimeter is in Setup mode and you can release
N O T E
To change a menu item setting in Setup mode, perform the following
steps:
1 Press
2 Press
3 Press
4 Press and hold
26
rotary switch to any non- OFF position.
or
to scroll through menu items.
or
to scroll through available settings. See
the details of each available option.
(Save) to save the changes. These parameters remain in
the non- volatile memory.
mode.
(Setup) for more than one second to exit Setup
U1241B/U1242B User's and Service Guide
(Setup) while turning the
Table 3- 9
button.
for