Advertisement
Quick Links
Templates must be printed without size modifications
and verified for dimensional accuracy.
• Before printing, select the printing options necessary
to ensure that copies are produced without size
adjustments.
• After printing, measure the dimensions indicated on
the template to ensure correct scale.
IMPORTANT
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Alarm Lock Trilogy ET-PDL Sargent 8812
Summary of Contents for Alarm Lock Trilogy ET-PDL Sargent 8812
- Page 1 IMPORTANT Templates must be printed without size modifications and verified for dimensional accuracy. • Before printing, select the printing options necessary to ensure that copies are produced without size adjustments. • After printing, measure the dimensions indicated on the template to ensure correct scale.
- Page 2 Fasten two #10 x 1-1/4" flat head sheet metal screws in lines indicated in Exit Device Instructions/Template. Line up lower mounting holes. Do not over-tighten. Pull wires from Alarm Lock template with horizontal and vertical lines and 4.025" 6. Replace and fasten Exit device & Battery box covers.
Need help?
Do you have a question about the Trilogy ET-PDL Sargent 8812 and is the answer not in the manual?
Questions and answers