Table of Contents
Advertisement
KH1508i / KH1516i User Manual
The access rights choices are explained in he table, below:
Choice
Full
The user can view the remote screen and can perform operations
on the remote system from his keyboard and monitor.
View Only
The user can only view the remote screen; he cannot perform any
operations on it.
None
No access rights - the Port will not show up on the User's list on the
Main Screen.
The default setting is Full for all users on all ports.The access rights can be
changed in the following ways:
Click directly over an access right to cycle through the choices
Move the highlight bar to a port and press + to cycle forward through
the choices
Move the highlight bar to a port and press - to cycle backward through
the choices
[Shift] Click on any port to have all the ports on the Station cycle
through the choices in unison
Hold down [Shift] and tap + to have all the ports on the Station cycle
forward through the choices in unison
Hold down [Shift] and tap - to have all the ports on the Station cycle
backward through the choices in unison
When you have finished making your choices, click Save.
If you want to abandon your choices and exit without saving, click
Cancel.
68
Description
Advertisement
Table of Contents
