Table of Contents
Advertisement
KH1508i / KH1516i User Manual
(Continued from previous page.)
Setting
SET
Specifies the operating platform of the computer attached to each port.
OPERATING
For each port, press the [Spacebar] to cycle through the choices (PC,
SYSTEM
Mac, Sun, and Other). Repeat until all the ports have been set, then
press [Esc]. The default is PC.
Note: If you are installing a Sun or Mac computer, before you run it for
the first time you must set the correct operating system for the port it is
connected to with this function; otherwise, it will not boot.
SET CAT 5
Lets you specify how long the Cat 5 cable between the port and the
LENGTH
KVM adapter cable is. Press [Spacebar] to cycle through the cable
length settings:
S: Short – for up to 25 m
M: Medium – for between 20 and 40 m
L: Long – for above 35 m
An S, M, or L appears next to the port to indicate the choice.
SET
Sets the keyboard language layout for the computers attached to each
KEYBOARD
port. Press [Spacebar] to cycle through the choices: English (US);
LANGUAGE
English (UK); French; German; Japanese; Korean; Traditional
Chinese; and Spanish. The default is English (US).
FIRMWARE
In order to upgrade the KH1508i / KH1516i's firmware (see KH1508i /
UPGRADE
KH1516i Upgrade, page 40) you must first enable Firmware Upgrade
Mode with this setting.
When you bring up this menu, the current firmware version levels
display. Select Y to enable Firmware Upgrade Mode, or N to leave this
menu without enabling it.
ADAPTER
In order to upgrade an Adapter Cables' firmware (see Adapter Cable
UPGRADE
Upgrade, page 46), you must first enable its Upgrade Mode with this
setting. Press [Spacebar] to select the KVM Adapter Cable you want
to upgrade.
When you select a KVM Adapter Cable, its current firmware version
levels display. Select Y to enable Firmware Upgrade Mode, or N to
leave this menu without enabling it.
30
Function
Advertisement
Table of Contents
