Battery Replacement - Actron CP9180 Manual

Troubleshooting

Battery Replacement

The Scan Tool requires 9V alkaline battery to operate without vehicle
power.
✓
When the battery needs to be replaced, the low-battery icon ( )
displays.
✓
Rechargeable batteries do not last as long as alkaline types and
are not recommended.
✓
Non-rechargeable Lithium (Li) battery can be used. Though
Lithium types last longer than the alkaline types, and they are more
expensive.
1.Place Display Face Down.
• On non-abrasive surface.
2. Remove Battery Cover.
• Turning phillips screw
counterclockwise.
• Slide battery cover off.
3. Remove Battery and Properly
Discard.
8
4. Install New Battery.
• 9V Alkaline Battery.
5. Reinstall Battery Cover.
• Slide battery cover on.
• Install phillips screw turning it clockwise.
• Do not overtighten screw.
5 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •