Actron CP9180 Manual page 70

Vehicle Diagnostics
From the OBD II Function List:
1. Select O2 Monitor Test.
•Use
key until O2 Monitor Test is
highlighted.
•Press
2. Select O2 Sensor.
•Use
key until desired O2 Sensor is
highlighted.
•Press
4 4
✓
The O2 sensors located upstream (before catalyst) may perform
differently than ones located downstream (after catalyst).
✓
Test IDs are shown for unknown O2 sensor tests.
3. View Results of Selection.
•Use
key.
4 – 24 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or DOWN arrow
ENTER.
UP or DOWN arrow
ENTER.
UP or DOWN arrow
OBD II Function List
=====================
View Fre eze Data
Drive Cycle Monitor
O2 Monitor Test
Diag Monitor Test
On-Board Systems
Record Data
Vehicle Information
Select O2 Sensor
=====================
O2 Bank1 Sensor1
O2 Bank1 Sensor2
O2 Bank2 Sensor1
O2 Bank2 Sensor2
O2 Bank1 Sensor1
=====================
RICH-LN
thresh
MAX:
-----(V)
MEAS:
0.555(V)
MIN:
-----(V)
MOD:
$10