Vehicle Diagnostics
From OBD II Function List
1. Select View Data.
•Use
key until View Data is
highlighted.
•Press
2. Observe while Scan Tool
validates PID MAP.
4 4
✓
Multiple PIDs may be sent if vehicle is equipped with more than one
computer module (for example a powertrain control module [PCM]
and a transmission control module [TCM]). The Scan Tool identifies
them by their identification names (ID) assigned by manufacturer (i.e.
$10 or $1A).
✓
If one or more control module stops responding, the Scan Tool
displays a message.
❒
If continuing, dashes will replace data in right hand column.
❒
If no is selected, then the Scan Tool attempts to re-establish
communication with that module.
4 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
:
UP or
DOWN arrow
ENTER.
OBD II Function List
=====================
I/M Readiness
Read Codes
Pending Codes
Erase Codes
State OBD Check
View Data
Validating PID Map
Validating PID list
PID xx / yy.
--- Please wait ---