Collating; Duplex Printing - Ricoh CL2000N - 420116 Color Laser 16.9PPM Network 64MB Supplement Manual

Collating

Specify the number of collated sets.
qty=number of collated sets (1 to 999)
Limitation
❒ Do not specify "qty" and "copies" commands at the same time.
The following samples show how to print 10 copies using the collate function
(host name: nphost, file name: file1).
• rsh
% rsh nphost print qty=10 < file1
• rcp
% rcp file1 nphost:qty=10
• ftp
ftp> put file1 qty=10

Duplex Printing

This option enables duplex printing.
Note
❒ Before selecting the duplex option, the binding option must be set to on.
❒ The print data and paper size affect the completion of the print job.
duplex=value of duplex printing
Duplex Printing
Enable
Disable
Reference
For more information about available paper size for duplex printing, see the
Printer Reference.
The following samples show how to set duplex printing (host name: nphost, file
name: file1).
• rsh
% rsh nphost print duplex=on,binding=longedge < file1
• rcp
% rcp file1 nphost:duplex=on,binding=longedge
• ftp
ftp> put file1 duplex=on,binding=longedge
Reference
For more information about available paper size for duplex printing, see the
Printer Reference.
Specifying the Device Option
Value
on
off
1
27