Ricoh CL2000N - 420116 Color Laser 16.9PPM Network 64MB Supplement Manual page 19

rsh
% rsh host_name print < file_name
For example:
host name is nphost, file name is file1
% rsh nphost print < file1
Note
❒ "host_name" is the name entered when executing the installation shell script.
❒ If you use a HP-UX, use the remsh command instead of rsh.
rcp
❖ ❖ ❖ ❖ To specify and print the file
% rcp file_name [file_name...] host_name:
For example:
host name is nphost, file names are file1 and file2
% rcp file1 file2 nphost:
❖ ❖ ❖ ❖ To print all of the files in a directory
% rcp -r directory_name host_name:
For example:
host name is nphost, directory name is directory1
% rcp -r directory1 nphost:
Note
❒ "host_name" is the name entered when executing the installation shell script.
❒ You can use wild cards ( * or ? ) for the file name.
ftp
Depending on the number of files to be printed, use the put or mput commands.
Limitation
❒ File names cannot contain "=" or ",".
❖ ❖ ❖ ❖ To print one file
ftp> put file_name
❖ ❖ ❖ ❖ To print several files
ftp> mput file_name [file_name...]
Note
❒ You can use wild cards ( * or ? ) for the file name with the mput command.
Printing Method
1
15