Table of Contents
Advertisement
4. CONNECTIONS
• Power plugs of connected equipment must be disconnected before camera
installation.
• A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard
connection.
• For details of wiring and operation of equipment to be connected, refer to their
operation manuals.
• A power supply with cable, connectors and coaxial cable are not supplied with the
camera.
4-1. Basic connection single system configuration
CAUTION: Never input 24V AC and 12V DC at the same time.
The recommended power supplies for this camera are 6 watt minimum for each 24V
AC UL Listed Class 2 power supply or 12V DC power supply.
Downloaded from
www.Manualslib.com
Notes on connecting
BNC Connector
1Red
Connector
2Black
Do not overload power supply
manuals search engine
24V AC UL Listed Class 2 power supply
or
12V DC power supply.
(*) Recommended power cord is a minimum wire size of 18 AWG.
Connector
1
Red wire
2
Black wire
- 6 -
Display Monitor
24V AC
12V DC
24V AC (L)
Positive
24V AC (N)
Negative
Advertisement
Table of Contents
