Toshiba DF03A - IK CCTV Camera Instruction Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Security Camera
  5. DF03A - IK CCTV Camera
  6. Instruction manual

Toshiba DF03A - IK CCTV Camera Instruction Manual

Instruction manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DOME CAMERA
IK-DP30A
Please read this manual thoroughly before use, and keep it handy
for future reference.

TABLE OF CONTENTS

IMPORTANT SAFEGUARDS ................................................
10. Specifications ................................................................ 37
Downloaded from
www.Manualslib.com
1. Features and description ..............................................
2. Cautions ........................................................................
3. Components .................................................................
4. Part names and Locations ............................................
5. Connections ..................................................................
6. Operation ......................................................................
7. Menu Directory ............................................................. 29
8. Switch Setting ............................................................... 31
9. Installation ..................................................................... 34
manuals search engine
INSTRUCTION MANUAL
ZEIM-4000008G A.1
Record in space provided below the Model No. and
the Serial Number as found on the label on the
bottom of the camera.
Model. No. IK-DP30A
Retain this information for future reference.
Serial No.
2
4
4
4
5
6
7

Advertisement

Table of Contents
loading

Related Manuals for Toshiba DF03A - IK CCTV Camera

Summary of Contents for Toshiba DF03A - IK CCTV Camera

  • Page 1: Table Of Contents

    INSTRUCTION MANUAL ZEIM-4000008G A.1 DOME CAMERA IK-DP30A Please read this manual thoroughly before use, and keep it handy for future reference. Record in space provided below the Model No. and the Serial Number as found on the label on the bottom of the camera.

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions 13.Lightning All the safety and operating instructions should be For additional protection on this video product read before the product is operated. during a lightning storm, or when it is left 2. Retain Instructions unattended and unused for long periods of time, The safety instructions and instruction manual unplug it from the wall outlet and disconnect the should be retained for future reference.
  • Page 3 • The CAUTION label, shown on the left, is attached on the camera. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightening flash with arrowhead WARNING : symbol, within an equilateral triangle, TO REDUCE THE RISK OF FIRE OR...

  • Page 4: Features And Description

    1. Features and description Quick Install Design - Cuts Installation Time in Half 480 Lines Horizontal Resolution 400 Degree/Second Pan 18X Optical/12X Digital Zoom Privacy Zone Masking 0.01 Lux Minimum Illumination (1/4, IR Cut filter Off) 50dB Signal-To-Noise Ratio 64 Position Preset Auto-Flip Proportional Zoom 2.

  • Page 5: Part Names And Locations

    4. Part names and Locations Control Terminal (RS-422) Power Terminal (24VAC only) Video out BNC connector Installation Brackets (3 Iegs) RS-422 termination switch Dome Base Installation Notch Installation Label Screw for cover Iock Dome Drive (Reserved) X18 Lens - 5 - Downloaded from www.Manualslib.com manuals search engine...

  • Page 6: Connections

    5. Connections Basic connection (Direct mode) 24V AC UL Iisted class 2 power supply RS422 AC Adaptor (twisted pair line) Monitor Keyboard Make sure to connect to a power supply that allows for at least 35W consumption RS422 Pin Out 2 wire RX - RX+ controller...

  • Page 7: Operation

    6. Operation (Power On display) When the dome camera powers-up, the software version, selected protocol, and other information are displayed on the TOSHIBA IK-DP30A monitor. VERSION*** PROTOCOL TOSHIBA-P ADDRESS 1 COMM 4800/N/8/1 6.1 ACCESSING THE MENU Accessing the menu varies with the model controller being used. Several controllers are listed below.
  • Page 8 6.2 Preset Commands The dome camera can set and perform various preset commands. The following table lists the preset number and whether is can be set (SET) or performed (GO). Presets 1-32 and 35-66 are user presets. Refer to your model's instructions for information on inputting preset commands.
  • Page 9 6.4 PERFORMING PRESET OPERATIONS JK-UC1/VLC485 Input the desired preset using the numeric keypad. Press the PRESET button to perform the preset. 6.5 PAN/TILT FUNCTIONS Manual PAN Manual Pan is controlled from a keyboard and the speed ranges from 0.1 degrees/sec to 90 degrees/sec depending on the joystick position.
  • Page 10 FRAME SCAN The dome camera can perform a frame scan operation during power-up and by direct control from the keyboard. Operation of zoom and tilt is the same as in Auto Scan. Scan limit stops ARE NOT set: The dome camera will move in 45-degree increments (called stops) horizontally until a manual pan, tilt, or zoom operation is performed from the keyboard.
  • Page 11 RANDOM SCAN The dome camera can perform a random scan operation during power-up and by direct control from the keyboard. Operation of zoom and tilt is the same as in Auto Scan. Scan limit stops ARE NOT set: The dome camera will move between random stops and random tilt angles until a manual pan, tilt, or zoom operation is performed from the keyboard.

  • Page 12: Camera Setup

    6.7 CAMERA SETUP 6.7.1 FOCUS CONTROL Direct • The focus can be controlled directly using near or far focusing controls. • The focus control has 4 varying speeds. • One Push Trigger Auto Focus. Menu MAIN MENU CAMERA MENU FOCUS MENU <CAMERA SETUP>...
  • Page 13 6.7.2 WHITE BALANCE CONTROL Direct • The White Balance can be set by One Push Trigger operation. Menu MAIN MENU CAMERA MENU <CAMERA SETUP> <FOCUS> <PAN/TILT SETUP> <PRESET TITLES> <AE> <OTHERS> ZOOM LIMIT EXIT SHARPNESS <LINE LOCK> PRIVACY ZONE The White Balance can be set to ATW (Auto Tracking White)/AUTO/ONE PUSHWB. •...
  • Page 14 MODE • AE mode can be set to FULL AUTO or SHUTTER PRIORITY. • FULL AUTO mode: The shutter is fixed at 1/60 sec and the camera will automatically adjust the iris according to the level. The iris can be controlled manually but will return to FULL AUTO if there is a zoom or pan/ tilt operation.
  • Page 15 Note At the time of SHUTTER PRIORITY mode choice, DAY/NIGHT mode is fixed in MANUAL. To change the AE options: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2.
  • Page 16 6.7.5 SHARPNESS Menu MAIN MENU CAMERA MENU <CAMERA SETUP> <FOCUS> <PAN/TILT SETUP> <PRESET TITLES> <AE> <OTHERS> ZOOM LIMIT EXIT SHARPNESS <LINE LOCK> PRIVACY ZONE The sharpness can be controlled from 0-15, with 15 being the sharpest. To change the SHARPNESS: 1.
  • Page 17 To change the LINE LOCK options: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to CAMERA SETUP and press the OPEN button to access the Camera menu.
  • Page 18 Notes: 1) Masking areas are only rectangles. 2) When using the PTZ function the privacy zone expands 2x vertically and 4x horizontally. 3) Although the privacy zone works in digital zoom, the zone setting is only available in a non- digital zoom area.
  • Page 19 6.8.2 PROPORTIONAL P/T Proportional P/T controls the pan and tilt speeds according to the amount of zoom. At telephoto settings, the pan and tilt speeds will be slower to keep the image from moving too fast on the monitor. Menu MAIN MENU PAN/TILT MENU AUTO FLIP...
  • Page 20 To enable SCAN LIMIT STOPS: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/ Tilt menu.
  • Page 21 4. Position the camera for the RIGHT LIMIT STOP. If the right limit stop is less than 10 degrees from the left limit stop, NOT ACCEPT will be displayed on screen. 5. Enter 91 preset. MANUAL RIGHT LIMIT will be displayed on screen. 6.8.5 PARK TIME MINUTES After a programmed number of minutes of inactivity, the dome camera will park to preset 1.
  • Page 22 To enable AUTO PATROL: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/ Tilt menu.
  • Page 23 6.8.8 SCAN TILT ANGLE The tilt angle of the dome camera for auto scan, random scan and frame scan can be set from 0 to 85 degrees or 92 degrees (0 degree is straight down). Menu MAIN MENU PAN/TILT MENU AUTO FLIP PROPORTIONALP/T <CAMERA SETUP>...
  • Page 24 To set STOP TIME: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/ Tilt menu.
  • Page 25 6.9 PRESET TITLES SETUP Titles can be set for up to 64 presets (pan/tilt position and zoom). Titles can be up to 20 characters in length and can be displayed at the top or bottom of the screen. Menu MAIN MENU TITLE MENU <CAMERA SETUP>...
  • Page 26 6.10 OTHERS MENU 6.10.1 POWER UP During Power-Up, the dome camera can be set to start in various modes. PARK: The dome camera moves to Preset 1 position. AUTO SCAN: The dome camera performs an auto scan operation. FRAME SCAN: The dome camera performs a frame scan operation.
  • Page 27 6.10.2 FREEZE ACTIVITY During frame scan, random scan or auto patrol, camera images will not be shown while the dome camera moves from the current position to the next position. Menu MAIN MENU OTHERS MENU <CAMERA SETUP> POWER UP PARK <PAN/TILT SETUP>...
  • Page 28 6.10.4 TILT ANGLE Set up the Tilt angle according to the housing used and the purpose. Indoor - 85 degrees MAX Outdoor - 92 degrees MAX Menu MAIN MENU OTHERS MENU <CAMERA SETUP> POWER UP PARK <PAN/TILT SETUP> FREEZE ACTIVITY ON <PRESET TITLES>...

  • Page 29: Menu Directory

    7. Menu Directory TOP MENU CAMERA SETUP MENU FOCUS SETUP MENU <CAMERA SETUP> <FOCUS> MODE AUTO <PAN/TILT SETUP> ACTIVE TIME <PRESET TITLES> <AE> INTERVAL TIME 5S <OTHERS> ZOOM LIMIT SENSITIVITY NORMAL EXIT SHARPNESS <LINE LOCK> PRIVACY ZONE P1 OFF PAN/TILT SETUP MENU AE MENU AUTO FLIP MODE...
  • Page 30 7.1 MENU LIST AND SETTINGS CAMERA AUTO / MANUAL / ZOOM AUTO MODE SETUP TRIGGER / INTERVAL ACTIVE TIME 1 255S FOCUS INTERVAL TIME 1 255S SENSITIVITY NORMAL / LOW NORMAL WHITE BALANCE AUTO / ATW / ONE PUSH WB MODE FULL AUTO / SHUTTER PRIORITY FULL AUTO...

  • Page 31: Switch Setting

    8. Switch Setting There are three switches which must be set up. Switch 1 sets the camera address. Switch 2 sets the protocol and bit rate. Switch 301 sets the termination – only used on the last daisy chained camera. DIP switch Dip switch (SW1 &...
  • Page 32 (1) SWI : Camera Address Camera Camera Address bit1 bit2 bit3 bit4 bit5 bit6 bit7 bit8 Address bit1 bit2 bit3 bit4 bit5 bit6 bit7 bit8 SWValue SWValue - 32 - Downloaded from www.Manualslib.com manuals search engine...
  • Page 33 = 4 + 32+ 64 + 128 + 228 → Off/Off/On/Off/Off/On/On/On Set up the protocol and bit rate to match the controllers settings. (2) SW2 (bit 1 - 2) Protocol bit1 bit2 Protocol TOSHIBA-P TOSHIBA-D Reserve1 Reserve2 (3) SW2 (bit3 - 4) Bit Rate Protocol...

  • Page 34: Installation

    9. Installation JK-H01A is a housing for ceiling mount of the Toshiba dome camera. 1. IK-DP30A Installation procedure (1) Carefully inspect to insure all parts are present and remove all parts from the box. (2) A template is included for ease in cutting the mounting hole.
  • Page 35 (JK-H01A top housing install) (6) Move the two support arms inside. Fig-2 (7) Remove knockout in the center of the housing and let the cable pass through. Lock screw Lock screw Support Arms Fig-2 (8) Put the video cable, power cable, and the Support wire is fixed here communication cable inside the housing from...
  • Page 36 (IK-DP30A dome base install) (11) Attach the video cable (included with the dome accessories) to the video connector of a dome base. [Note: Do not connect a thick coaxial cable to a dome camera. There is a possibility of damaging a connector. Be sure to use the cable included in the dome accessories.] (12) Communication cables are directly inserted in the terminal of the dome base.

  • Page 37: Specifications

    10. Specifications Overall Temperature of operation 32° to 122°F (0° to 50°C) Preservation temperature –4° to 140°F (–20° to 60°C) Weight 1.8 kg AC24 V ±10% 60 Hz Power supply Power consumption 20 W Camera Image Sensor 1/4 type IT CCD (High Sensitive CCD) 768(H) ×...
  • Page 38 0.1° - 45°/s Preset Speeds Pan: 400°/s Tilt: 200°/s Proportional P/T Provided Remote Control RS-422 (receive only) Protocol Toshiba-P/D (Dip sw selectable) Data rate 1200, 2400, 4800, 9600bps (Dip sw selectable) - 38 - Downloaded from www.Manualslib.com manuals search engine...
  • Page 39 Downloaded from www.Manualslib.com manuals search engine...

  • Page 40: Limited Warranty

    Product, if it does not perform as warranted. In order to take advantage of this Limited Warranty. You must: (a) call (877) 855-1349 to receive a RMA number: and (b) pay all transportation and insurance charges for shipment of the Product to the ASP or Toshiba Exchange Center.

This manual is also suitable for:

Dp30a - day/night ptz dome camera cctvIk-dp30a

Table of Contents