Connections - Toshiba IK-52N Operating Manual

3. CONNECTIONS

Standard Connection
Lens
Cautions on Connection
• When connecting the camera cables, be sure to turn off the camera and the other equipment
connected.
• When using another lens, the best camera performance of this camera may not be obtained.
(For example, low resolution may occur, and flare, ghost or shading may occur)
• Use the DC power source described below.
• Power supply voltage: +10.5V to +15V
• Current rating: More than 830 mA
• Ripple voltage: Less than 50 mV(p–p)
Connector Pin Assignments
1
2 10
11
3
4
Pin External synchroniza-
No. tion mode (HD/VD)
1 GND
2 DC+12V
3 Video output (GND)
4 Video output (signal)
5 HD input (GND)
6 HD input (signal)
7 VD input (signal)
8 GND
9 –
10 –
11 –
12 VD input (GND)
IK-53N
IK-52N
9
8
Connector:
HR10A–10R–12PB by HIROSE electronics Co. Ltd
12 7
6
5
Reset restart
GND
DC+12V
Video output (GND)
Video output (signal)
HD input (GND)
HD input (signal)
Reset (signal)
GND
–
VIDEO INDEX output
(signal)
–
Reset (GND)
Image processor
Camera Cable
(optional)
External trigger mode
GND
DC+12V
Video output (GND)
Video output (signal)
HD input (GND)
HD input (signal)
VD input (signal)
GND
–
VIDEO INDEX output
(signal)
Trigger pulse input
(signal)
VD input (GND)
Internal synchroniza-
tion output signal
GND
DC+12V
Video output (GND)
Video output (signal)
HD output (GND)
HD output (signal)
VD output (signal)
GND
–
–
–
VD output (GND)
5