Connections; Standard Connection; Cautions On Connection; Connector Pin Assignments - Toshiba IK-SX1 Instruction Manual

4. CONNECTIONS

4.1. Standard Connection

Lens

4.2. Cautions on Connection

• When connecting the camera cables, be sure to turn off the camera and the other
equipment connected.
• The lens for high resolution is recommended.
When using another lens, the best camera performance of this camera may not be
obtained.
(For example, low resolution may occur, and flare, ghost or shading may occur)
• For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA
approved ungrounding type AC adaptor with the specifications described below.
Power supply voltage: DC12V 10%
Current rating: More than 830 mA, Less than 2.5A
Ripple voltage: Less than 50 mV(p–p)
Connector: HR10A–7P–4S by HIROSE electronics Co. Ltd

4.3. Connector Pin Assignments

<IK-SX1L, IK-SX1>
DC IN 12V
1 +12V
2 +12V
3 GND
4 GND
Camera cable
IK-SX1L
IK-SX1
DC IN 12V
DC power supply
Hirose Electronics Co. Ltd. HR10A-7P-4PB
1 3
2 4
(option)
Pins 1, 2: +12V
Pins 3, 4: GND
Image processor
7