JVC GY-HD200UB - Camcorder - 1080i Owner's Manual page 73

CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor
and in the Viewfinder (Cont'd)
No. Item
6 Audio sampling frequency in- 32 K : Indicated when the AUDIO MODE item on the AUDIO/MIC[1/2] menu screen is set to 32 K. (Audio
dication is recorded with 12-bit, 32 kHz sampling.)
48 K : Indicated when the AUDIO MODE item on the AUDIO/MIC[1/2] menu screen is set to 48 K. (Audio
is recorded with 16-bit, 48 kHz sampling.) When HDV format is set, 48K is displayed.
X See page 87.
Whether or not to display this item is set with the AUDIO item on the LCD/VF[3/4] menu.
7 Audio level meter indication Displays the CH-1, CH-2 audio level meters.
Whether or not to display this item is set with the AUDIO item on the LCD/VF[3/4] menu.
X See page 91.
8 Standard audio level indication The level at which audio is recorded on the tape is indicated by "O".
–20 dB, –12 dB
X See "AUDIO REF.LEVEL" on page 87.
CH-1
CH-2
9 Iris indicator display M: Iris set higher than normal
b: Iris set to normal
N: Iris set lower than normal
The indication can be switched ON/OFF with the F.NO/IRIS IND. item on the LCD/VF[1/4] menu screen.
X See page 89.
0 Iris F-value indication Indicates the F-number of the connected lens.
OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE
It is not displayed when the lens is removed. For some lenses, no display appears.
The indication can be switched ON/OFF with the F.NO/IRIS IND. item on the LCD/VF[1/4] menu screen.
X See page 89.
a Filter position indication Indicates the current filter position.
No display : FILTER OFF
ND1 : FILTER ND1 (1/4ND)
ND2 : FILTER ND2 (1/16ND)
The indication can be switched ON/OFF with the FILTER item on the LCD/VF[1/4] menu screen.
X See page 89.
b Audio Lock Indication Displayed when the audio signal is locked to the video signal.
c AUX display Displays when in external image input mode (AUX IN mode)
26
Contents
–20 dB –12 dB
O O
O O O O O O O O O \ \ \ ]
O O O O O O O O O \ \ \ ]
STATUS 2 Screen
STATUS 2
This screen displays the camera setup statuses.
Event display is not available while this screen is displayed.
Indication
FILE FILE F CAM1 [********], CAM2-4 [********], and EXT1 - 4 [********] * indicates SUB NAME X See pages 100-102.
A F symbol is displayed when a menu setting read from LOAD FILE was changed.
The display disappears when the setting is saved using STORE FILE.
FULL AUTO ON, OFF
GAIN 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, ALC
*
SHUTTER (When STEP is selected)
OFF, 1/6, 1/6.25, 1/7.5, 1/12, 1/12.5, 1/15, 1/24, 1/25, 1/30, 1/48, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
(When VARIABLE is selected)
1/24.01 - 1/10489.5
(Displayed when FAS or ALC mode is selected)
EEI
* The range for the shutter speed differs depending on the video format. X See page 86.
WHT. BAL A[##00K], B[##00K], PRESET[##00K], FAW
For A and B, ## represents 23, 25, 28, 30, 32, 34, 37, 43, 52, 65, or 80. For PRESET, 32 or 56.
AE LEVEL –3, –2, –1, NORMAL, +1, +2, +3
FILTER OFF, ND1 [1/4ND], ND2 [1/16ND]
ZEBRA 60-70%, 70-80%, 85-95%, OVER 95%, OVER 100%
REMAIN Displays the remaining tape (minutes)
AUDIO Displays the audio sampling frequency and the audio level adjustment mode (Ex: 32K (CH1 Z CH2 a) Z (for AUTO
mode) a (for MANUAL mode)
* When SHUTTER DISP. on the LCD/VF[3/4] menu screen is set to DEG, the shutter display for the frame rate in 24p or 25p mode is degrees.
Indication
SHUTTER (When STEP is selected)
360.0°, 180.0°, 172.8°, 150.0°, 144.0°, 135.0°, 120.0°, 105.0°, 90.0°, 75.0°, 60.0°, 45.0°, 30.0°, 22.5°, 11.2°
(When VARIABLE is selected)
0° to 360°
STATUS 3
Displays a list of setting statuses for USER1, 2, and 3 as well as LENS RET item on the SWITCH MODE menu screen.
X See page 86.
Events are not displayed while these statuses are being displayed.
Indication
USER1 NONE, BARS, PRESET TEMP., B.STRETCH1 to 5, B.COMPRESS1 to 5, AE LEVEL+, AE LEVEL–, RET, LOAD FILE
USER2
USER3 NONE, BARS, PRESET TEMP., B.STRETCH1 to 5, B.COMPRESS1 to 5, RET, LOAD FILE
LENS RET RET, FOCUS ASSIST
STATUS 4
This screen only displays VTR mode indication, date and time, event display and alarm indications.
* Whether or not date and time should be displayed and the display style are set on the TIME/DATE menu screen.
X See "Displaying the Time and Date on the Screen" on page 42.
STATUS 3 Screen
Indication Contents
Indication Contents
Indication Contents
27