JVC GY-HD200UB - Camcorder - 1080i Owner's Manual page 108

MENU SCREENS
OTHERS[1/2] Menu Screen
The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)
Item Function/Setting (bold characters indicate initial settings)
ANALOG OUT CHAR. Sets whether or not to display characters such as status and menus on the screen for the [Y/P
OUT] terminals.
ON : On-screen display.
OFF : No on-screen display.
MEMO
When ANALOG OUT CHAR. item is set to ON, the content displayed on the viewfinder is also displayed in the
video from the video output terminal. During VTR recording, the mode is displayed in red on the viewfinder. How-
ever, color is not applied for the following video outputs.
• Component output of recording or playback in DV format
• Composite output
SDI OUT CHAR. Sets whether or not to display characters such as status and menus on the screen for the [HD/SD SDI] terminal.
ON : On-screen display.
OFF : No on-screen display.
LONG PAUSE TIME Selects the time (minutes) before the tape protect mode (drum head rotation stopped) is engaged when the record-
standby condition continues.
3MIN : 3 minutes
5MIN : 5 minutes
* When used in a cold environment or when the stopped or STILL status continues, the setting will be 3 minutes or
less regardless of the setting on the menu.
* Normally, set "3MIN" and use this to prevent head clogging and tape damage.
ALARM VR LEVEL Selects whether or not alarm sound is emitted and the volume of the alarm sound.
The alarm sound is output through the monitoring loudspeaker and the PHONES jack.
OFF : Sound is not output.
LOW : Alarm sound is soft.
MIDDLE : Alarm sound is normal.
HIGH : Alarm sound is loud.
FRONT TALLY Selects the lighting method of the FRONT TALLY lamp during recording.
BLINK : The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
steadily during recording.
ON : The lamp lights only during recording.
OFF : The lamp is always off.
BACK TALLY Selects the lighting method of the BACK TALLY lamp during recording.
BLINK : The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
steadily during recording.
ON : The lamp lights only during recording.
OFF : The lamp is always off.
FORMAT LED Sets whether or not the [HDV/DV LED] g on page 15 lights for HDV format or DV format.
ON : Lights.
OFF : Does not light.
GENLOCK.. Calls up the GENLOCK menu screen.
Adjusts the H PHASE or SC PHASE of image signals of this device according to the external synchronization signal
input to the [GENLOCK IN] terminal.
X See page 99.
NEXT PAGE To display the OTHERS[2/2] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK The TOP MENU screen returns when the SHUTTER dial is pressed while the cursor is at this position.
96
OTHERS[2/2] Menu Screen
* This is not displayed in VTR mode.
Item
/P ] and [VIDEO 1394 REC TRIGGER*
B R
BACK SPACE [HDV]*
Function/Setting (bold characters indicate initial settings)
Sets how to control the REC trigger command output from the IEEE1394 connector. (Can be displayed and set in
camera mode)
Set this when recording a backup of the HDV/DV signal from GY-HD250/GY-HD251 onto another device.
OFF : Does not control the backup device.
SYNCRO : Controls the backup device in conjunction with the recording start/stop mode status on this device, and
if there is no videocassette or if no tape remains for recording, controls the backup device in conjunction
with the REC trigger button and the lens VTR button on this device.
SPLIT : The REC trigger button on the right panel of this device controls the backup device recording start/stop.
Set this when you want to control the timing of the recording on this device and the backup device sep-
arately.
SERIES : Automatically starts recording on a backup device that is on Pause when the tape on this device has less
than 3 minutes remaining during shooting.
MEMO
• If you use the backup recording function on the BR-HD50, set this item to OFF.
• The cursor (K) does not move to this item when this device is recording.
This function controls the camera tape transport, back space and pre-roll time when the camera is connected to an
external HDD or external back up Recorder via IEEE1394 in HDV mode.
P-1394 : Priority for IEEE1394 recording (Auto setting)
P-TAPE : Priority for camera VCR recording
1394 REC
IEEE1394
BACK SPACE [HDV] TRIGGER
connection
(X See page 97)
OFF
SYNCRO
Connected and
Power ON
SPLIT
SERIES
P-1394
OFF
No connection or
SYNCRO
Power OFF
SPLIT
See Note 4
SERIES
OFF
SYNCRO
Connected and
Power ON
SPLIT
SERIES
P-TAPE
OFF
SYNCRO
No connection or
Power OFF
SPLIT
SERIES
Note 1:
REC start signal will be sent 3 seconds after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 2:
REC start signal will be sent just after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 3:
In this mode, the IEEE1394 stream is discontinuous during internal VCR back space editing (when the REC trigger
is operated). This may result in breaks in the recording on tape on an external recorder. In the case of HDD recording
this may result in this device staying in REC PAUSE or divided files.
Note 4:
If HD/SD SDI OUT on the VIDEO FORMAT[2/2] menu screen is set to ON, the internal VCR start delay becomes
approximately 3 seconds.
Internal
External Recorder or HDD
VCR
vie IEEE1394 terminal
start delay
N/A
See Note 1
approx. 3 seconds
See Note 2
N/A
approx. 1 second N/A
See Note 3
approx. 1 second
N/A
approx. 1 second N/A
97